User manual ZANUSSI ZDF601K

[. . . ] DISHWASHER ZDF 601 www. video. uk. electrolux. com 152950 12/0 Instruction Book UK Contents Safety instructions Disposal Economical and ecological dishwashing Description of the appliance The control panel "3 in 1" function Prior to using for the first time The water softener Filling with dishwasher salt Rinse aid In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent Different kinds of detergent Washing programmes Starting a washing programme Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost precautions Moving the machine Something not working Service and Spare Parts Customer Care Department Guarantee Conditions 3 3 3 4 5 6 7 7 8 8 9 9 9 10 10 11 11 12 13 14 15 15 15 15 15 16 18 18 19 Installation instructions Fitting under a counter Levelling Fitting a decor panel on the door (ONLY for model ZDF 601M) Water supply connections Water outlet hose connection Electrical connection Hints for test centres 20 20 20 20 21 21 22 23 Technical specifications Dimensions Width Height with worktop Height without worktop Max depth Max depth with open door 60 cm 85 cm 82 cm 60 cm 118. 5 cm Electrical connection: Voltage Overall power Fuse Water supply pressure Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher's door. Minimum Maximum 0, 05 MPa (0. 5 bar) 0, 8 MPa (8 bar) 12 place settings Capacity This appliance complies with the following E. E. C. Directives: - 73/23 or 19. 2. 73 (Low Voltage Directive) and subsequent modifications; - 89/336 or 3. 5. 89 (Electromagnetic Compatibility Directive) and subsequent modifications. 2 Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. You MUST read it carefully before installing or using the appliance. Installation q q Check your dishwasher for any transport damage. [. . . ] This programme does not require the use of detergent. 1, 7 - 1, 9 23 - 25 (2) Automatic 65°-50° Normal soil. Crockery and cutlery 1, 1 - 1, 5 12 - 25 Quick Wash 60° Light soil. Crockery and cutlery 0, 8 9 (3) Economy 50° Normal soil. Partial load (to be completed later in the day). 0, 1 4 (1) POWER BOOST - The Intensive 70° degree heavy soil programme features "Power Boost". An additional detergent dose (5/10 grams) must be placed in the WRD dispenser (see page 11). This programme begins with a heated pre-wash phase using the additional detergent for maximum cleaning results. (2) Auto washing programme During the Auto washing programme the amount of soil on the dishes is determined by how cloudy the water is. If the appliance is partially loaded and the dishes lightly soiled, the «prewash», «main wash», and «rinse» phases of the programme are shorter and the water consumption level is lower. If the appliance is fully loaded and the dishes heavily soiled, the «prewash», «main wash», and «rinse» phases of the programme are longer and the water consumption level is higher. During the Auto programme the temperature of the main wash water is also automatically adjusted between 50°C and 65°C depending on the amount of soil on the dishes. (3) Testing programme for EN 50242 (see "Hints for Test Centres"). This programme, developed for the use of detergents with enzymes, allows you to achieve, with reduced consumption of energy the same cleaning results that would otherwise be obtained only with the 65°C programmes and conventional detergents. To compensate the lower temperature, the duration of washing and drying have been extended. (4) The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply. The programme duration is visible in the digital display when the selection of the washing programme occurs. 13 Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Press the On/Off button The On/Off indicator light illuminates. Interrupt a washing programme in progress a) Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. b) Press the On/Off button, in this case all the indicator lights turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted. Cancel a washing programme in progress To cancel a washing programme you have to reset the dishwasher; press simultaneously function buttons 2 and 3 for about 2 seconds. After about 2 seconds all the indicator lights will turn off (except for the On/Off indicator light and eventually the rinse aid and salt indicator lights) indicating that the running programme has been cancelled. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. 4. [. . . ] The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided. Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. [. . . ]