User manual YANMAR 3HM

[. . . ] · The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60-950. Warning To avoid damage or malfunction: · Do not allow the charging contacts or the battery to come into contact with metal objects. · Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion. · Handsfree activation could suddenly increase the volume in the earpiece to Important 1. 2 Safety Information · This equipment is not designed to make emergency calls when the power fails. [. . . ] 23 3 Press r key on the called handset to answer the internal call, where both internal callers can talk. Press e key on the first handset to transfer the external call to the called handset. · The external call is transferred. 4 Note If there is no answer from the called handset, press i key to resume the external call. 5. 8. 3 1 2 Answer an external call during intercom During intercom, a new call tone is emitted when there is an incoming external call. · The call is established. Note To put the internal call on hold, press i key to answer the incoming external call. handsets (in intercom). The three parties can share the conversation and no network subscription is required. 1 During the call, long press i key to put the external call on hold (the caller can no longer hear you). · INT 23456 * is displayed, representing the handset numbers available for intercom (* represents all handsets). 2 Enter the handset number (key 2-6) you wish to call for the conference. 3 Press r key on the called handset to answer the internal call, where both internal callers can talk. 4 Press and hold i key for 2 seconds on the first handset to start the three-party conference. · CONFERENCE will be displayed on the screen once the conference call is established. 5. 8. 4 Switch between an internal and external call During the call, press and hold * key to switch between an internal or external call. 5. 9 Paging The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries. 1 Press m key in idle mode, scroll : to PERSONAL SET and press Personal settings 6. 2 Change the Handset Name You can name the handset and display the handset name in idle mode. 1 Press m key in idle mode, scroll : to PERSONAL SET and press mOK, scroll : to HANDSET NAME and press mOK. Press pBACK key to delete the characters one by one. 27 3 Enter the new name (maximum 10 characters) and press mOK to confirm. · A validation tone is emitted and the screen returns to previous menu. Tip Once the display language is set, the option menus on the handset will switch to display in the selected language immediately. However, it will not change the language of the predefined outgoing message of your answering machine. Activate/Deactivate Auto Answer This function enables you to answer a call automatically by simply lifting the handset off the base station. By default, the Auto Answer feature is OFF and in this case you have to press the r key to answer a call. 1 Press m key in idle mode, scroll : to PERSONAL SET and press mOK, scroll : to AUTO ANSWER and press mOK. · A validation tone is emitted and the screen returns to previous menu. 6. 3 6. 4 Change the Display Language Your handset can support different display languages, depending on your country selection during the WELCOME mode. 1 Press m key in idle mode, scroll : to PERSONAL SET and press mOK, scroll : to LANGUAGE and press mOK. · A validation tone is emitted and the screen returns to previous menu. 28 Personal settings 7 Advanced settings 7. 1 Change Recall time Recall time (or dial delay) is the time delay by which the line will be disconnected after you press r key. The default value of recall time that is preset in your handset should be the best suited for your country network and therefore you should not need to change it. [. . . ] · The answer machine will drop the line immediately if there is no detection of the master PIN entry within 8 seconds. · If the remote access code is correct, a validation tone can be heard. 8. 8 Call Screening 8. 8. 1 Set Handset Call Screening If Handset call screening is set to On, you can hear the incoming message via the handset speaker and decide whether or not to pick up a call. 1 Press m key in idle mode, scroll : to ANSW MACHINE and press mOK, scroll : to ANSW SETTINGS and press mOK, scroll : to HS SCREENING and press 2 Scroll : to ON or OFF and press mOK. mOK. · A validation tone is emitted and the screen returns to previous menu. [. . . ]