User manual XTANT BLM1

[. . . ] Locate the right angle header connector soldered on the circuit board next to the Xtant logo. Notice that one of the openings on the header connector is blocked by white filler material. [. . . ] First, to eliminate "ground loops" or inducted noises which enter the amplifier through the input signal cables. The BLM-1 will accept speaker level signals from any head unit or low powered amplifier (up to 50 Watts) without adapters. In this application, we suggest starting in the -20 position. FOUR - YEAR LIMITED U. S. A. WARRANTY This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Xtant Technologies (Xtant) warrants its amplifiers and accessories to be free from defects in materials and workmanship under normal use and service for a period of four (4) years from the date of original purchase when the unit is installed by an Authorized Xtant Select Dealer. NonAuthorized Dealer installed products carry a one (1) year parts and labor limited warranty. The extent and conditions of Xtant's Limited Warranty are as follows: 1. Authorized Xtant Select Dealer Installed Products: Xtant will either repair or replace at no charge, to the original purchaser, any unit which Xtant's examination discloses to be defective and under warranty, provided the defect occurs within four (4) years from the date of purchase when the unit is installed by an Authorized Xtant Select Dealer and the product is returned immediately to Xtant. Non-Authorized Xtant Dealer Installed Products: Xtant will either repair or replace at no charge, to the original purchaser, any unit which Xtant's examination discloses to be defective and under warranty, provided the defect occurs within one (1) year from the date of purchase and the product is returned immediately to Xtant. The date of purchase and proof of Authorized Dealer Installation of an Xtant amplifier and/or accessory must be established by an original (or copy of the original) sales receipt which must accompany the article being returned for warranty work. [. . . ] If improper operation of your Xtant product should occur, contact your Authorized Xtant Select Dealer for assistance with the return and factory repair of your Xtant product. If an Authorized Xtant Select Dealer is not available, please contact Xtant's Customer Relations Department at (602) 970 9900 from 8:00 am to 5:00 pm (MST) for assistance. Application Chart MODEL INPUTS BLM-1'S REQUIRED 2140c 3150c 3150c 303x 303x 3300c 3300c 603x 603x 4180c 4180c 1001d 1001dx 2 channels 2 channels 4 channels 2 channels 4 channels 2 channels 4 channels 2 channels 4 channels 2 channels 4 channels 2 channels 2 channels 1 2 2 2 2 2 2 2 2 2 2 1 1 Xtant Technologies · 7676 South 46th Street · Phoenix, Arizona 85040 [. . . ]