User manual X10 CR15A

[. . . ] Vanguard Remote TM For use with VK77A Camera System Model CR15A The CR15A Remote lets you move the position of a VK77A Vanguard camera from left to right (Pan) and up and down (Tilt) as well as Zoom in on the picture. [. . . ] Stores Pan/Tilt positions and Zoom settings for each camera (up to 9 settings). Sweeps through the stored positions for the selected camera. Stored Positions Your Vanguard Camera can remember nine locations, including vertical/horizontal positions, and zoom settings. Storing a Position You can store up to nine positions in your camera. Press and hold the Setup button on your remote control until the C1 button lights green. Press the number button (1 through 9) on the remote to store the position under that button. When finished, press Setup to save the positions you entered. Selecting Positions Once you've stored positions in the camera, press the desired number button on the remote to move to that position. If you press Sweep, the camera will automatically switch through all the positions you've stored. [. . . ] Just store the new position using a button that you programmed before. Clearing Stored Positions You can delete all stored positions. [. . . ]