User manual WHIRLPOOL WED7800XW

[. . . ] For questions about features, operation/performance, parts, accessories, or service, call: 1-800-253-1301 or visit our website at. We have provided many important safety messages in this manual and on your appliance. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING. [. . . ] NOTE: If you do not select the WRINKLE SHIELDTM setting, the dryer stops after cool down. Select the Damp Dry Signal to alert you that your clothes are approximately 80% dry. This is useful when you want to remove lightweight items in a mixed load to avoid overdrying or remove partially dry items that may need ironing. the Damp Dry Signal is useful when drying bedsheets/linens in a mixed load. When the signal goes off, open the door to stop the dryer, rearrange the load inside the dryer, close the door and restart the dryer to finish the drying cycle. Use the Air Only Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. NOTE: When the WRINKLE SHIELDTM setting is selected and the Cycle Signal is on, a tone sounds every 5 minutes until the clothes are removed, or the WRINKLE SHIELDTM setting ends. Follow the progress of your dryer with the drying Status indicator lights. On some models, select Drum Light to turn on the light inside the dryer drum. During a cycle, if Drum Light is selected, the drum light turns on and will remain on until DRUM LIGHT is pressed again, the door is opened and closed, or will turn off after 5 minutes. When the dryer is not running, the drum light will turn on when DRUM LIGHT is pressed or the dryer door is opened, and it will remain on until the dryer door has been open for 5 minutes, the dryer door is closed or DRUM LIGHT is pressed again. The Eco Monitor shows your estimated energy usage compared to the other cycles and options. You can change Automatic and Manual Cycles, Modifiers, and Options anytime before pressing Start. NOTE: If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off. Place drying rack inside dryer drum, positioning the back wire on the ledge of the inner dryer back panel. Push down on front edge of drying rack to secure at the front of the dryer. You can change an Option or Modifier anytime before the selected Option or Modifier begins. NOTE: If you happen to press START/PAUSE twice, the program clears and your dryer shuts down. If all of your loads on all Automatic cycles are consistently not as dry as you would like, you may change the preset Dryness Level settings to increase the dryness. Your Dryness Level settings can be adjusted to adapt to different installations, environmental conditions or personal preference. These stains are not harmful to your dryer and will not stain future loads of clothes. IMPORTANT: Do not run the dryer with the lint screen loose, damaged, blocked, or missing. [. . . ] Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an authorized Whirlpool servicer is not available. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance with Whirlpool's published installation instructions. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or cannot be easily determined. dISCLAIMER OF IMPLIED WARRANTIES IMPLIED WARRANTIES , INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE , ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. [. . . ]