User manual WHIRLPOOL LRF4001RY

[. . . ] When storing appliance, loop cord around cord storage wrap on back of appliance. Do not operate appliance with a damaged cord, or if the appliance has been dropped or damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair the appliance. Incorrect reassembly or repair could cause a risk of fire, electric shock, or injury to persons when the appliance is used. [. . . ] Fabric Freshener results may vary, depending on fabric type and thickness, distilled water level in cup, room temperature, or household voltage level. A Cooling indicator light indicates that the drying cycle is complete and air is circulating to cool the garment(s). The Fabric Freshener works best with no more than 2 clothing items per cycle. Fabric Freshener will not operate if items are placed on the bottom (exhaust grille) of Fabric Freshener. If using Cotton Performance Pack tensioning weights, add weights to lower edges of garments. see "Accessories" for information on ordering additional accessories. NOTE: Do not use tensioning weights on garments that may stretch easily. NOTE: For drying cycle only, leave cycle cup empty and press the ON/OFF button for approximately 1 second. Fill cycle cup with appropriate level of room temperature, distilled water according to material being refreshed and the markings on the side of the cycle cup. Failure to use distilled water may result in permanent damage to the machine. A Start/Steaming indicator light indicates Fabric Freshener cycle has started and is in the steaming process. A Gentle Drying indicator light indicates steaming cycle is complete and the drying cycle has started. Large clip with hole (slide onto hanger rod in Yes* the Fabric Freshener) *For best results, premoisten fabrics with distilled water before placing in Fabric Freshener. NOTE: The cup you receive with your Fabric Freshener may vary in design from what is shown here. IMPORTANT: To ensure proper performance, always keep bag closed while Fabric Freshener is operating. Press and hold the ON/OFF button for approximately 1 second while the Start/Steaming indicator light glows. Cycle cup for distilled water only Press down on the cycle cup to be sure cycle cup is firmly in place. Start/Steaming, Gentle Drying, Cooling, and Complete indicator lights will light as each cycle progresses through each stage. Once the Complete indicator light is lit, the cycle is complete and you may remove your items. NOTE: After a period of inactivity, the Complete indicator light will turn off and the Fabric Freshener will go into a sleep mode until the ON/OFF button is pushed again. Press and hold the ON/OFF button for approximately 1 second, or until all indicator lights are off. When you have finished using your Fabric Freshener, you may wish to close and store the Fabric Freshener. [. . . ] If this product fails to work as warranted, customer's sole and exclusive remedy shall be replacement according to the terms of this limited warranty. whirlpool Corporation shall not be liable for incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. [. . . ]