User manual WHIRLPOOL AWOD4814
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWOD4814. We hope that this WHIRLPOOL AWOD4814 user guide will be useful to you.
You may also download the following manuals related to this product:
WHIRLPOOL AWOD4814 (1411 ko)
Manual abstract: user guide WHIRLPOOL AWOD4814
Detailed instructions for use are in the User's Guide.
[. . . ] “Reset” button “Start delay” button
Special options Prewash Cold wash Rinse hold Spin Start delay
E
Programme
Care Labels
Max. Load kg
Type of wash/Notes - Respect the manufacturer’s recommendations on the care label
Normally to heavily soiled and robust white cotton laundry. In case of heavy soiling or stains, you can add an oxygen-based bleach additive which can be used at 95 °C. This programme eliminates bacteria, ensuring sanitization of your laundry. [. . . ] to start draining.
Cotton Cotton Cotton Jeans Synthetics Synthetics Delicates Delicates Daily load Quick wash Wool/Handwash EcoCotton* EcoCotton* EcoCotton*
95 60 40 40 60 40 40 30 40 30 40 60 60 40
FAILURE INDICATORS
If one of the failure indicators blinks, consult the “Troubleshooting Guide” in your Instructions for Use. “Service”: failure or malfunction of an electrical component. allows to run the machine at the
START DELAY
The “Start delay” consumer’s convenience, for example at night when electricity is cheaper. Do not use liquid detergent when activating “Start delay”. • • • • Select programme, temperature and options. Press the “Start delay” button to select a delay time of 1, 3, 6, 9 or 12 hours. The delay time indicator goes off when the programme starts and it is replaced by the programme flow bar indication. • Once having pressed the “Start/Pause” button “Start delay” button. To cancel the “Start delay” . . . before you press the “Start/Pause” button • : , the delay time can be changed by pressing again the
Consumption values were measured in normalized conditions, in compliance with IEC/EN 60456. In the home, they may vary depending on the individual water supply pressure and temperature, the load and the type of wash. The consumption data indicated are based on an inlet water temperature of approx. 15 °C through the cold fill valve as well as the hot fill valve (if available). If your washing machine has a hot fill valve, connection of this valve to hot water supply will lower the energy consumption by reduced heating times, depending on the individual hot fill inlet water temperature. Water and energy consumptions refer to the default setting of the programmes, with temperature and load as indicated in the table; selecting any options or changing the spin speed will also change the consumption data. The programme duration may differ from the values indicated above as it depends on the operation conditions applicable at that time (see also “Troubleshooting Guide” in your Instructions for Use). For reasons of energy saving, the real water temperature may deviate from the declared cycle temperature. ** *** To reduce the water temperature, some cold water is added at the end of the main wash cycle before the water is drained. Automatic adaptation of programme duration after detection of wash load.
PROGRAMME END
• The “Door open” indicator completely to save energy. After about a quarter of an hour, the washing machine will switch off
LOAD LAUNDRY, ADD DETERGENT AND SELECT THE PROGRAMME
Load the laundry, close the door and add detergent as indicated on the front page and as described in the chapter “Detergent and Additives” in your Instructions for Use. The washing machine is designed to save energy, therefore, if you have selected a programme but do not start it within about a quarter of an hour, it will switch off automatically. [. . . ] The new programme continues at the same position where the previous programme was interrupted. to pause the
Turn the programme selector to another position or press the “Reset” button . :
. . . after having pressed the “Start/Pause” button Press the “Start/Pause” button indicator goes off.
RESET A RUNNING PROGRAMME
The “Reset” button • cancels a programme before the end. .
SELECT ANY DESIRED OPTION
- the delay time
The water is drained. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWOD4814
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWOD4814 will begin.