User manual WHIRLPOOL AKP 371/IX INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AKP 371/IX. We hope that this WHIRLPOOL AKP 371/IX user guide will be useful to you.


WHIRLPOOL AKP 371/IX INSTRUCTION FOR USE: Download the complete user guide (2135 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AKP 371/IX MODE D'EMPLOI (2136 ko)
   WHIRLPOOL AKP 371/IX BRUGSVEJLEDNING (819 ko)
   WHIRLPOOL AKP 371/IX BRUGSVEJLEDNING (819 ko)
   WHIRLPOOL AKP 371/IX BEDIENUNGSANLEITUNG (837 ko)
   WHIRLPOOL AKP 371/IX INSTRUZIONI PER L'USO (2132 ko)
   WHIRLPOOL AKP 371/IX TABLEAU DE PROGRAMMES (202 ko)
   WHIRLPOOL AKP 371/IX PRODUCT-INFORMATIEBLAD (202 ko)
   WHIRLPOOL AKP 371/IX LIBRO DE INSTRUCCIONES (2133 ko)
   WHIRLPOOL AKP 371/IX PROGRAM CHART (202 ko)
   WHIRLPOOL AKP 371/IX PRODUCT-INFORMATIEBLAD (202 ko)

Manual abstract: user guide WHIRLPOOL AKP 371/IXINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] • Unpack the oven and make sure that the appliance has not been damaged during transport and that the oven door closes properly. • After removing the oven from its packaging, leave it on the polystyrene base to prevent it from being damaged. [. . . ] • When installing the oven it is advisable to wear protective gloves. • Connection to the mains must be carried out by a qualified electrician in accordance with the manufacturer's instructions and in compliance with local regulations. • The installer is responsible for connecting appliances correctly to the mains and for observing the safety regulations. • The oven power cable must be long enough to connect the built-in appliance to the mains. • Observance of safety directives requires that a multi pole switch with a minimum contact gap of 3 mm be used for the installation. • After the oven has been installed, the electrical components must be inaccessible. Connecting the oven to the power supply • Make sure that the voltage indicated on the rating plate is the same as the mains voltage. When installation has been completed, the bottom of the oven must be inaccessible. • Ovens that are not equipped with a cooling system cannot be installed in split level units (fig 2). • When installing, make sure that the sides of the oven do not touch the adjacent kitchen units (fig. • When installing ovens under the worktop, leave a minimum clearance of 5 mm between the upper edge of the oven and the lower edge of the worktop (fig. In order for the appliance to operate properly, this clearance must never be obstructed. • If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets (G) (fig. [. . . ] • If the kitchen unit is not securely fixed to the wall, it must be anchored with standard brackets (G) (fig. 7) available on the market. ~ ~ H05 RR-F 3 X 1. 5 mm² H05 RR-F 3 X 1. 5 mm² (Switzerland only) Securing the oven • Lift the oven getting hold of it by the openings on the sides and insert it into the housing unit, being careful not to trap the power supply cable (fig. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AKP 371/IX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AKP 371/IX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.