User manual WHIRLPOOL AKL700/IX PROGRAM CHART

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AKL700/IX. We hope that this WHIRLPOOL AKL700/IX user guide will be useful to you.


WHIRLPOOL AKL700/IX PROGRAM CHART: Download the complete user guide (2619 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AKL700/IX MODE D'EMPLOI (175 ko)
   WHIRLPOOL AKL700/IX KURZANLEITUNG (394 ko)
   WHIRLPOOL AKL700/IX GEBRUIKSAANWIJZING (172 ko)
   WHIRLPOOL AKL700/IX BEDIENUNGSANLEITUNG (174 ko)
   WHIRLPOOL AKL700/IX INSTRUZIONI PER L'USO (173 ko)
   WHIRLPOOL AKL700/IX TABLEAU DE PROGRAMMES (395 ko)
   WHIRLPOOL AKL700/IX PRODUCT-INFORMATIEBLAD (394 ko)
   WHIRLPOOL AKL700/IX INSTRUCTION FOR USE (170 ko)

Manual abstract: user guide WHIRLPOOL AKL700/IXPROGRAM CHART

Detailed instructions for use are in the User's Guide.

[. . . ] Tap closed Maximum opening/delivery Minimum opening or reduced delivery Electric ignition • • • • CLEANING THE HOB PARTS • • • • • • Grids, burner caps and burners can be removed to be cleaned. Clean them by hand with warm water and non-abrasive detergent, removing any food residues and checking that none of the burner openings is clogged. Rinse and dry Refit burners and burner caps correctly in the respective housings. [. . . ] • Keep children away from the hob when it is in use and do not let them play with the controls or any other appliance parts. Warning: the protective rubber feet on the grids could represent a chocking hazard for young children. After removing the grids, please ensure that all the feet are correctly fitted. After use, make sure that the knobs are in position OFF and close the main gas delivery or cylinder tap • TROUBLESHOOTING GUIDE If the hob will not operate correctly. Before calling the After-Sales Service, refer to the Troubleshooting Guide to determine the problem. 1. • • • • • • 2. The burner fails to ignite or the flame is not even Check that: The gas or electrical supplies are not shut off and especially that the gas supply tap is open. The burner does not stay lit Check that: When lighting the burner, the knob has been pressed for enough time to activate the protection device. The containers are not stable Check that: The bottom of the container is perfectly flat The container is centered on the burner. The grids have not been exchanged or positioned incorrectly. • • • • 3. • • • If after the above checks the fault still occurs, get in touch with the nearest After Sales Service. AFTER-SALES SERVICE PROTECTING THE ENVIRONMENT 1. Packaging The packaging material is entirely recyclable, and is marked with the recycling symbol , which identifies it as a type of material that must be sent to local waste-disposal centres. If any repairs are required, please contact an authorised After-Sales Service, as indicated in the warranty. Product This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). Note: Failure to comply with these instructions may compromise the safety and quality of the product. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. [. . . ] • Replace it with the injector suitable for the new type of L gas. Earth • If you have a Triple Crown burner use side spanner to (yellow/green) replace the injector (E) Before installing the hob, remember to affix the gas N calibration plate supplied with the injectors in such a way • The manufacturer cannot be held responsible for any injury to persons or animals or damage to property that it covers the existing information relating to gas arising from failure to comply with these requirements. • When the hob is installed, provide a multi-pole circuit breaker with a contact separation of at least 3 mm, that provides full disconnection. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AKL700/IX




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AKL700/IX will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.