User manual WESTINGHOUSE LTV-17V1

[. . . ] The product can be heavy and bulky, requiring the assistance of a second person to move. Unstable surfaces can cause your LCD to topple and fall, resulting in possible damage or injury. Avoid exposing the LCD display to direct sunlight or high temperatures, which can damage or shorten its useful life. Do not place near heat sources such as radiators, heat registers, or other appliances that generate heat. [. . . ] Inserting the batteries incorrectly may result in cracking or leakage, which may pose a fire risk or lead to personal injury. · Dispose of the battery in accordance with local laws and regulations. · When the remote control will not be used for an extended period, remove the batteries. 6 2. Attach Base Stand to LCD TV Attach the Base Stand to the LCD TV stand neck. Connect Antenna, Cable, Video, S-Video, and/or YPbPr Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV. VGA Audio In Out 8 4. Connect power cables Connect the DC power adapter cord to the LCD TV and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet. DC Power Plug Input 5. Turn Power On Press the power button on the front of the LCD TV display or on the remote control. LED light will turn blue if signal input is detected, orange if no signal. Power Button 9 6. Using the _/_ arrow keys or the MENU key, step down into the menu and highlight the Auto scan function. Once completed, switch channels by using the CH _/_ arrow keys on the remote. Using the _/_ arrow keys will change the channel that is displayed on the CH edit area. To ADD/DEL channels step down into the CH edit function to select channel to be added or deleted. Step down to the Status function and using the _/_ arrow keys select Off or On depending on whether you want to delete or add the channel. Enjoy watching TV! 10 Controls & Connections This section describes the front panel controls, and remote control in more detail. Front View of the Product Use the buttons on the front panel control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the bottom of the page and are defined in the "OSD Functions" section. Speaker IR Receiver Control keys are shown in detail below 7 1 2 3 4 5 6 Button 1 Mode Input / Menu - / Contrast TV Source PC Source Input Menu Scroll down Scroll down OSD Menu Contrast Mode Volume Menu Brightness Menu Hold for 2secs, and Display input menu. then press again to Hold for 2secs, and then press set power savings again to set power savings level. Display OSD menu CHDisplay contrast menu Display brightness menu Display volume menu Auto-adjust PC image. ON or OFF ON or OFF 2 3 Scroll down Navigate left Navigate right Exit OSD menu Decrease contrast Increase contrast Exit contrast menu Decrease volume Increase volume Exit volume menu Decrease brightness Increase brightness Exit brightness menu Scroll up Select input source Exit input menu 4 + / Brightness Exit / Volume Control Auto CH+ 5 Display volume menu 6 7 Power 11 Remote Control The Remote Control should be used within 5 meters of the LCD TV. POWER 18. TV Set source to TV tuner Switch the power between on & off 19. Analog 2. SLEEP Use to shut off TV after a period of time Push to select PC VGA source 20. DISPLAY 3. MTS Display the channel information Multi-language, stereo and mono selection 21. PREV. [. . . ] The BACK key on the remote control or Exit button on the control keys allows you to exit out of the OSD menus and functions. Function Name Brightness Contrast Clock Phase H-POSITION V-POSITION Sharpness Explanation Brightness adjustment. Default value is 2. 21 PC OSD Menus Please refer to the TV Navigational Menus which are similar to the following PC menus. When pressing the MUTE button on the remote control, the following messages will appear on the screen. Selecting this Menu provides the ability to choose preset display levels and customize user RGB levels. 22 PC OSD Menu Language Selection Menus Choose from 9 different languages. OSD Time-out, Default positioning. Similar to TV mode functions. OSD Selection of the Input Source between Analog, AV1, S-Video, YPbPr and TV. 23 Input Source not found or Out of Range If there is no source connected to the Input selected. The following will be displayed: If in Analog mode and the Display settings are not compatible with or are out of range of the LCD TV/Monitor the following will be displayed: 24 Appendix Specifications Preliminary Product Specification Panel Size/Type Native/Optimum Resolution Aspect Ratio Response Time Contrast Ratio Maximum Brightness Viewing Angle Display Colors Active Display Area PC Compatibility Video Compatibility (Video, SVideo) Tuner Compatibility Video Features 17" Color TFT LCD. [. . . ]