User manual THUNDER TIGER DUCATI 999R

[. . . ] We race and test our products around the world to bring you state-of-the-art items. We offer on-line help 24-7 on our www. acehobby. com forum and our product specialists are ready to take your call if you have any technical questions. Please read all instructions and familiarize yourself with the systems and controls of this product before operating. [. . . ] Install the supplied side guard wire onto the mount. 5 PREPARING THE RADIO a b c a. Check the frequency printed on the receiver crystal, and make sure it matches with the transmitter crystal. When there is a radio glitch, it will most likely be caused by improper crystal, damaged crystal, or people operating on the same frequency. 6 OPERATION/RADIO BATTERY INSTALLATION a b a. Secure the Ni-Cd battery pack (not included) into the battery tray with supplied rubber bands 4 7 RADIO OPERATION a b c a. When turning off, first turn the receiver off, then the transmitter off. To reverse the functions of servos, use the small, white servo reverse switches located on side of the pistol transmitter (or the inset servo reverse switches located at the bottom of the stick transmitter). To trim the servos on pistol transmitter, use the trim switches on side of the steering wheel (the ST. On a stick transmitter, the trim levers are located accordingly around the sticks. d. For more details, please check the transmitter instruction manual. 8 OPERATING RADIO STEERING FUNCTION a b c Due to its unique steering system, the following advises for the controlling should be noted, a. The steering is basically accomplished by changing the center of body gravity, not the turning of the forks. With the radio transmitter and receiver on, turn the steering wheel/stick to the right. The body leans towards the right side (The front tire/wheel should turns left oppositely), the chassis follows, leaning to the same side. The front tire/wheel should turn right oppositely. 5 9 ADJUSTING ELECTRIC SPEED CONTROLLER Before operating your model, you have to set to either NEUTRAL or HIGH SPEED position of the electric speed controller prior running the motor. a. (Always keep the wheels off the ground when checking the operation of the radio equipment) Connect the wire to the battery pack Turn on the transmitter, and then switch on the electric speed controller afterwards. [. . . ] This product, its parts, and its construction tools can be harmful to your health. Always exercise extreme caution when assembling and/or operating this product. Check your radio frequency with the proper operating frequency of the area or country. [. . . ]