User manual TEKTRONIX POWER MEASUREMENT AND ANALYSIS SOFTWARE DATASHEET

[. . . ] Power Measurement and Analysis Software DPOPWR Data Sheet Automatic Ripple Measurement Setup Eliminates Manual Processes Spectral Analysis Locates Ripple and Noise on the Output Voltage and EMI Issues with the Switching Power Supply Precompliance Testing to the EN61000-3-2, EN61000-3-2 AM14, and MIL 1399 (400 Hz) Standards Reduces Compliance Test Time and Risk Automated THD, True Power, Apparent Power, Power Factor, and Crest Factor Features Eliminate Tedious Manual Calculations Modulation Analysis quickly provides Accurate Active Power Factor Characterization Automatic Deskew ensures Accurate, Time-correlated Results Correct Scale Factor and Unit Display while using Third-party Current Probes Eliminates Manual Calculations and Human Error Features & Benefits Hi-Power Finder and Magnetic Property Pinpoint the Sources of Reliability Problems Power Loss Measurements at the Switching Device and Magnetic Component Improve Switching Power Supply Efficiency Sophisticated Report Generation Saves Time Customizable Safe Operating Area Mask Testing with Linear and Log Scale for Reliability Testing In-circuit Bpeak, Permeability, and Coercive Force Measurements Determine the Reliability of the Magnetic Component Applications Power Loss Measurement at Switching Device and Magnetic Component Characterization of Power Semiconductor Devices Optimal Drive Characterization of Synchronous Rectifiers Measurement and Analysis of Ripple and Noise Precompliance Testing to IEC Standard EN61000-3-2, EN61000-3-2 AM14, and MIL Standard 1399 (400 Hz) Debugging Active Power Factor Correction Circuits Data Sheet DPOPWR DPOPWR Power Measurement and Analysis software transforms Tektronix digital oscilloscopes into sophisticated analysis tools that quickly measure and analyze power dissipation in power supply switching devices and magnetic components, and then generates detailed test reports in customizable formats. DPOPWR, used with a Tektronix DPO7000, MSO70000, or DPO/DSA70000B Series oscilloscope and differential voltage and current probes, forms a complete measurement system for power supply design and test. [. . . ] Reduce your development and testing time by using the precompliance testing capability of DPOPWR to test power supply designs to these standards from your bench. DPOPWR enables you to set units and scale factor for current and voltage probes to read the result in the right unit. Automated deskew capabilities help you to get accurate results. Input/Output Analysis Input Analysis ­ True Power, Apparent Power, Power Factor, Crest Factor, Current Harmonics, THD, precompliance testing for EN61000-3-2, EN61000-3-2 AM14, and MIL 1399 (400 Hz) standards. Output Analysis ­ Ripple due to line frequency and switching frequency, Turn-on Time, Spectral Analysis (automated spectral analysis by setting start frequency, stop frequency, and resolution bandwidth). Report Generation Create template, custom report layout, and report generation. Deskew Automatic. Recommended Oscilloscopes and Probes DPO7000, MSO70000, and DPO/DSA70000 Series Digital Phosphor Oscilloscopes Current Probes ­ TCP0030*1, TCP0150*1, TCP202*2, 3. Deskew Fixture ­ 067-1686-xx. *1 Compatible only with DPO7000 Series models. *2 Probe requires TPA-BNC TekVPI to BNC adapter on the DPO7000 Series models. *3 Probe requires TCA-BNC TekConnect to BNC adapter on the MSO70000 and DSA/DPO70000B Series models. *4 Probe requires TCA-1MEG TekConnect to BNC adapter on the MSO70000 and DSA/DPO70000B Series models. For additional information about available probes, please visit www. tek. com/Measurement/programs/advisor/ Ordering Information DPOPWR Power Measurement and Analysis Software When Ordered Along with DPO7000, MSO70000, and DSA/DPO70000B Series Opt. After-purchase Upgrade for DPO7000 and DSA/DPO70000B Series DPO7UP Opt. PS1 ­ DPOPWR, P5205, TCP0030, TPA-BNC Adapter, Probe Cal, and Deskew Fixture 067-1686-xx. Characteristics Power Device Analysis Switching Analysis ­ Switching Loss, Hi-Power Finder, Safe Operating Area (SOA), SOA Mask Editor with Mask Testing, Dynamic ON Resistance, di/dt, dv/dt. [. . . ] Information in this publication supersedes that in all previously published material. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. [. . . ]