User manual SONY VPCEH11FX/L

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY VPCEH11FX/L. We hope that this SONY VPCEH11FX/L user guide will be useful to you.


SONY VPCEH11FX/L : Download the complete user guide (2108 Ko)

Manual abstract: user guide SONY VPCEH11FX/L

Detailed instructions for use are in the User's Guide.

[. . . ] Inserting objects can result in injury due to the high speed rotation of internal fans. Do not connect the grounding wire to gas pipe, water pipe, lightning rod or telephone grounding wire. A burning smell), stop the operation immediately and turn the circuit breaker OFF. Improper cable connection can cause the power supply cord, plug and the electrical outlet to overheat and cause fire. [. . . ] € Only the room temperature can be displayed for 5 seconds when the unit is not in operation. E-9 ENGLISH ADJUSTING THE AIR FLOW DIRECTION VERTICAL AIR FLOW DIRECTION The air flow direction is automatically preset in each mode as follows for optimum comfort: COOL and DRY modes FAN ONLY and HEAT modes HOW TO ADJUST THE AIR FLOW DIRECTION Press the SWING button on the remote control once. • The vertical adjustment louvre will change its angle continuously. Horizontal air flow Diagonal air flow Adjustment range COOL and DRY modes FAN ONLY and HEAT modes Press the SWING button again when the vertical adjustment louvre is at the desired position. € The adjusted position will be memorized and will be automatically set to the same position when operated the next time. The adjustment range is narrower the SWING range in order to prevent condensation from dripping. HORIZONTAL AIR FLOW DIRECTION Hold the horizontal adjustment louvre as shown in the diagram and adjust the air flow direction. cAUTION Never attempt to adjust the vertical adjustment louvres manually. € Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the remote control is used for the adjustment. € When the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode for an extended period of time, condensation may result. Do not adjust the horizontal adjustment louvre extremely to the right or left when operating the air conditioner with fan speed "SOFT" for an extended period of time. E-13 ENGLISH TIMER OPERATION NOTE: Before setting the timer, make sure the clock is properly set with the current time. 1 Press the TIMER OFF ( 2 The TIMER OFF indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time. ) AM remote control at the signal receiver 3 Point theon the unit and press the TIMER SET window DISPLAY (SET/C) button. FULL POWER MODE 1h FAN SWING CLEAN SET/C 1 2 3 TO CANCEL TIMER MODE TIPS ABOUT TIMER OFF OPERATION When the TIMER OFF mode is set, the temperature setting is automatically adjusted to prevent the room from becoming excessively hot or too cold while you sleep. € The current clock MODE time will be displayed on the remote control. FAN SWING ) on the unit 1h COOL/DRY MODE: • One hour after the time operation begins, the temperature setting rises 1°C higher than the original thermostat setting. CLEAN SET/C HEAT MODE: • One hour after the timer operation begins, the temperature setting drops 3°C lower than the original thermostat setting. NOTE: • If any TIMER ON, TIMER OFF and ONEHOUR OFF TIMER are set, the TIMER CANCEL button cancels all settings. TO CHANGE TIME SETTING NOTE: • The Auto Sleep function will not activate during the FAN ONLY mode. ) at the signal receiver 3 Point the remote control press the TIMER SET window on the unit and DISPLAY (SET/C) button. fULL POWER MODE 1h 1 2 3 4 FAN SWING CLEAN SET/C Select the operation condition. [. . . ] 3 REINSTALL THE AIR FILTERS NOTE: • Replacement is necessary at the interval of 3 years, as the deodorising effect will deteriorate. Replacement filter: Type AZ-F910C CHANGING THE DUST COLLECTION FILTER (GRAY) The filter should be changed every 3~6 months Filter stopper 1 REMOVE THE AIR FILTERS 2 CHANGE THE DUST COLLECTION FILTER 1 Take off the old dust collection filter from the air filters. 2 Set the new dust collection filter, the black side facing upward, under the filter stoppers located on the air filters. NOTE: 3 REINSTALL THE AIR FILTERS • The dirty dust collection filter is not washable for reuse. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY VPCEH11FX/L




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY VPCEH11FX/L will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.