User manual SONY STR-K840P

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY STR-K840P. We hope that this SONY STR-K840P user guide will be useful to you.


SONY STR-K840P : Download the complete user guide (543 Ko)

You may also download the following manuals related to this product:

   SONY STR-K840P SPEAKER CONNECTION (RECEIVER FOR THE HT-DDW840) (787 ko)
   SONY STR-K840P NOTE ON FAILURE OF THE REMOTE BUTTONS TO OPERATE (10 ko)

Manual abstract: user guide SONY STR-K840P

Detailed instructions for use are in the User's Guide.

[. . . ] 4-238-377-12(2) FM Stereo FM-AM Receiver Operating Instructions Owner's Record The model and serial numbers are located on the rear panel. Refer to them whenever you call upon your Sony dealer regarding this product. HT-DDW840/DDW740 Serial No. GB HT-DDW840 HT-DDW740 © 2002 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] RANGE Lets you attenuate the level of the LFE (Low Frequency Effect) channel output from the sub woofer without effecting the level of the bass frequencies sent to the sub woofer from the front, center or surround channels via the Dolby Digital or DTS bass redirection circuitry. · For LFE mix level, "0 dB" outputs the full LFE signal at the mix level determined by the recording engineer. · To mute the sound of the LFE channel from the sub woofer, select "OFF". However, the low frequency sounds of the front, center, or surround speakers are output from the sub woofer according to the settings made for each speaker in the speaker setup (pages 15­19). XXX * The parameters can be adjusted separately for MULTI CH IN (HT-DDW840 only). Enjoying Surround Sound Front balance ( XXX) L R BAL. L/R Lets you adjust the balance between front left and right speakers. Center level (CTR XXX dB) Lets you adjust the level of the center speaker. Surround left level (SUR. L. XXX dB) Lets you adjust the level of the surround left speaker. Surround right level (SUR. R. This may be useful when you want to watch movies at low volumes late at night. We recommend using the "MAX" setting. · To reproduce the sound track with no compression, select "OFF". · To reproduce the sound track with the dynamic range intended by the recording engineer, select "STD". · To compress the dynamic range in small steps to achieve the sound you desire, select "0. 1"­ "0. 9". · To reproduce a dramatic compression of the dynamic range, select "MAX". Note Lets you adjust level of the surround right speaker. Sub woofer level (S. W. XXX dB) Lets you adjust the level of the sub woofer. Dynamic range compression is possible with Dolby Digital sources only. continued 29GB Customizing sound fields (continued) Adjusting the bass and treble The BASS +/­ and TREBLE +/­ button lets you adjust the tone (bass or treble) of the front speakers for optimum sound. You can adjust the tone for each separate sound field. 1 Start playing a program source encoded with multi channel surround sound. 2 Press BASS +/­ or TREBLE +/­ to adjust the tone. The setting is stored automatically. Initial settings Parameter Initial setting BASS TREB. 0 dB 0 dB Bass (BASS) Lets you adjust the bass tone. Treble (TREB. ) Lets you adjust the treble tone. Note When you use the Micro Satellite Speakers or other small speakers, adjust LEVEL on the subwoofer (page 20) to reinforce the bass. Resetting customized sound fields to the factory settings 1 If the power is on, press ?/1 to turn off the power. 2 Hold down MODE and press ?/1. "SF. CLR. " appears in the display and all sound fields are reset at once. 30GB Receiving Broadcasts Notes Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Storing FM stations automatically (AUTOBETICAL) (Models of area code CEL, CEK only) · Do not press any button on the receiver or supplied remote during autobetical operation. · If you move to another area, repeat this procedure to store stations in your new area. · If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote. For details on the buttons used in this section, see pages 39-45 for remote RM-PP411 and pages 46-49 for remote RM-U306. Receiving Broadcasts This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. If you want to store FM or AM stations one by one, see "Presetting radio stations" on page 33. 1 Press ?/1 to turn off the receiver. 2 Hold down MEMORY and press ?/1 to turn the receiver back on. 1 Press TUNER on the remote. The last received station is tuned in. "AUTO-BETICAL SELECT" appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. [. . . ] · Select a stronger FM station. All memorized settings Customized sound fields page 15 page 30 52GB Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: Reference Power Output2) (8 ohms 1 kHz, THD 10 %) STR-K840P: FRONT1): 120 W/ch CENTER1): 120 W SURR1): 120 W/ch Models of other area code Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0. 7 %) STR-K840P: 100 W + 100 W2) STR-K740P: 80 W + 80 W2) Reference Power Output2) (8 ohms 1 kHz, THD 10 %) STR-K840P: FRONT1): 120 W/ch CENTER1): 120 W SURR1): 120 W/ch STR-K740P: FRONT1): 100 W/ch CENTER1): 100 W SURR1): 100 W/ch 1) Depending on the sound field settings and the source, there may be no sound output. 2) Measured under the following conditions: Area code Power requirements With 8 ohm loads, both channels driven, from 40 ­ 20, 000 Hz; rated 100 watts (STR-K840P only)/80 watts (STR-K740P only) per channel minimum RMS power, with no more than 0. 09 % total harmonic distortion from 250 milliwatts to rated output (Models of area code U only). Amplifier section POWER OUTPUT Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 40 Hz ­ 20 kHz, THD 0. 09 %) STR-K840P: 100 W + 100 W STR-K740P: 80 W + 80 W Reference Power Output (8 ohms 1 kHz, THD 0. 7 %) STR-K840P: FRONT1):100 W/ch CENTER1): 100 W SURR1): 100 W/ch STR-K740P: FRONT1): 80 W/ch CENTER1): 80 W SURR1): 80 W/ch Models of area code CEL, CEK Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0. 7 %) STR-K840P: 100 W + 100 W2) STR-K740P: 80 W + 80 W2) Reference Power Output2) (8 ohms 1 kHz, THD 0. 7 %) STR-K840P: FRONT1): 100 W/ch CENTER1): 100 W SURR1): 100 W/ch STR-K740P: FRONT1): 80 W/ch CENTER1): 80 W SURR1): 80 W/ch Models of area code AR, SP Rated Power Output at Stereo Mode (8 ohms 1 kHz, THD 0. 7 %) STR-K840P: 90 W + 90 W2) E2/E3 SP, CEL, CEK, AR MX Frequency response MULTI CH IN3), CD, MD/TAPE, DVD/LD, VIDEO 1, 2 Inputs (Analog) MULTI CH IN3), CD, MD/TAPE, DVD/LD, VIDEO 1, 2 240 V AC, 50 Hz 230 V AC, 50 Hz 120 VAC, 60 Hz 10 Hz ­ 50 kHz +0. 5/­2 dB (with sound field, and tone bypassed) Additional Information Sensitivity: 250 mV Impedance: 50 kilohms S/N4): 96 dB (A, 250 mV5)) 3) HT-DDW840 only 4) INPUT SHORT (with sound field and tone bypassed). 5) Weighted network, input level. continued 53GB Specifications (continued) Inputs (Digital) DVD/LD (Coaxial) Harmonic distortion at 1 kHz Mono: 0. 3% Stereo: 0. 5% Separation 45 dB at 1 kHz 30 Hz ­ 15 kHz, +0. 5/­2 dB 60 dB at 400 kHz Sensitivity: ­ Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: ­ Impedance: ­ S/N: 100 dB (A, 20 kHz LPF) Frequency response Selectivity VIDEO 2 (Optical) AM tuner section Tuning range Models of area code U, CA With 10-kHz tuning scale: 530 ­ 1710 kHz6) With 9-kHz tuning scale: 531 ­ 1710 kHz6) Models of area code E2/E3, AR, MX With 10-kHz tuning scale: 530 ­ 1610 kHz6) With 9-kHz tuning scale: 531 ­ 1602 kHz6) Models of area code SP, CEL, CEK With 9-kHz tuning scale: 531 ­ 1602 kHz Antenna Loop antenna Outputs MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 250 mV Impedance: 10 kilohms Voltage: 2 V Impedance: 1 kilohms Tone Gain levels: ±6 dB, 1 dB step Intermediate Frequency 450 kHz Usable sensitivity 50 dB/m (at 1, 000 kHz or 999 kHz) 54 dB (at 50 mV/m) 0. 5 % (50 mV/m, 400 Hz) 35 dB 40 dB FM tuner section Tuning range Antenna terminals 87. 5 - 108. 0 MHz 75 ohms, unbalanced S/N Harmonic distortion Selectivity At 9 kHz: At 10 kHz: Intermediate Frequency 10. 7 MHz Sensitivity Mono: Stereo: Usable sensitivity S/N Mono: Stereo: 18. 3 dBf, 2. 2 µV/75 ohms 38. 3 dBf, 22. 5 µV/75 ohms 11. 2 dBf, 1 µV/75 ohms 76 dB 70 dB 6) You can change the AM tuning scale to 9 kHz or 10 kHz. To reset the scale to 10 kHz (or 9 kHz), repeat the procedure. Video section Inputs Video: Outputs Video: 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms 54GB General Power requirements Area code Power requirements Frequcency range Dimensions (w/h/d) SS-MSP2 SS-CNP2 Mass SS-MSP2 SS-CNP2 160 Hz ­ 20, 000 Hz Approx. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY STR-K840P




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY STR-K840P will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.