User manual SONY STR-K750P

[. . . ] 4-244-183-12(1) Home Theater System Operating Instructions Owner's Record The model and serial numbers are located at the rear of the unit. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. HT-DDW750 © 2003 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] XXX dB) 1 Start playing a program source encoded with multi channel surround sound. Lets you adjust the level of the surround right speaker. Sub woofer level (S. W. XXX dB) 2 Press MAIN MENU repeatedly to select " TONE ". 3 Press MENU Enjoying Surround Sound or MENU to select the parameter you want to adjust. setting you want. Lets you adjust the level of the sub woofer. Dynamic range compressor ( COMP. RANGE 4 Press MENU + or MENU ­ to select the The setting is stored automatically. Initial settings Parameter Initial setting Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. We recommend using the "MAX" setting. · To reproduce the sound track with no compression, select "OFF". · To reproduce the sound track with the dynamic range intended by the recording engineer, select "STD". · To reproduce a dramatic compression of the dynamic range, select "MAX". Note BASS XX dB TREB. XX dB 0 dB 0 dB Bass (BASS XX dB) Lets you adjust the bass tone. Treble (TREB. XX dB) Lets you adjust the treble tone. Note Dynamic range compression is possible with Dolby Digital sources only. Effect level (EFCT. XXX) When you use the Micro Satellite Speakers or other small speakers, adjust LEVEL on the subwoofer (page 19) to reinforce the bass. Lets you adjust the "presence" of the current surround effect. Resetting customized sound fields to the factory settings 1 If the power is on, press ?/1 to turn off the power. 2 Hold down 2CH and press ?/1. "SF. CLR. " appears in the display and all sound fields are reset at once. 27GB Receiving Broadcasts Notes Before receiving broadcasts, make sure you have connected FM and AM antennas to the receiver (page 7). Storing FM stations automatically (AUTOBETICAL) (Models of area code CEL, CEK only) · Do not press any button on the receiver or supplied remote during autobetical operation. · If you move to another area, repeat this procedure to store stations in your new area. · If you move the antenna after storing stations with this procedure, the stored settings may no longer be valid. If this happens, repeat this procedure to store the stations again. Direct tuning You can enter a frequency of the station you want directly by using the numeric buttons on the supplied remote. For details on the buttons used in this section, see pages 36­43. This function lets you store up to 30 FM and FM RDS stations in alphabetical order without redundancy. If you want to store FM or AM stations one by one, see "Presetting radio stations" on page 30. 1 Press TUNER on the remote repeatedly to select the FM or AM band. 1 Press ?/1 to turn off the receiver. 2 Hold down MEMORY and press ?/1 to turn the receiver back on. The last received station is tuned in. "AUTO-BETICAL SELECT" appears in the display and the receiver scans and stores all the FM and FM RDS stations in the broadcast area. For RDS stations, the tuner first checks for stations broadcasting the same program, then stores only the one with the clearest signal. The selected RDS stations are sorted alphabetically by their Program Service name, then assigned a 2-character preset code. Regular FM stations are assigned 2-character preset codes and stored after the RDS station. When done, "FINISH" appears in the display momentarily and the receiver returns to the normal operation. 2 Press D. [. . . ] 90 × 150 × 124. 5 mm (3 5/8 × 6 × 5 inches) Approx. 230 × 90 × 127 mm (9 1/8 × 3 5/8 × 5 inches) Approx. 1. 0 kg (2 lb 4 oz) Continuous RMS power output (6 ohms, 20 ­ 250 Hz) SA-WMSP75 75 W SA-WMSP85 100 W Additional Information Reproduction frequency range 28 Hz ­ 200 Hz High frequency cut-off frequency 150 Hz Input Power requirements Area code Power requirements LINE IN (input pin jacks) Mass SS-MSP2/SS-MSP75 SS-CNP2/SS-CNP75 U, CA, MX E2/E3 120 V AC, 60 Hz 120/220/230 V AC, 50/60 Hz CEL, CEK, SP, AU 230 V AC, 50/60 Hz Power consumption SA-WMSP75 SA-WMSP85 Dimensions (w/h/d) 75 W 100 W Approx. 270 × 325 × 398 mm (10 3/4 × 12 7/8 × 15 3/4 inches) including front panel Approx. [. . . ]