User manual SONY LCJ-RXB DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY LCJ-RXB. We hope that this SONY LCJ-RXB user guide will be useful to you.


SONY LCJ-RXB DATASHEET: Download the complete user guide (166 Ko)

You may also download the following manuals related to this product:

   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)
   SONY LCJ-RXB NOTES ON USE (416 ko)

Manual abstract: user guide SONY LCJ-RXBDATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] Select one of the hookups below depending on the jack type: a To connect to a headphones jack Polarity of the plug • When you connect the connecting cord directly to an earphone jack, the audio signal will not be output through the right channel. €¢ If the connected equipment has the AVLS (Automatic Volume Limiter System) function, be sure to turn the function off when using the transmitter. Otherwise, you will have to turn up the volume of the headphones, and that may cause noise. €¢ Do not place the transmitter near a fluorescent lamp, etc. [. . . ] The serial number is located inside the battery compartment of the transmitter and inside of the battery compartment of the headphones. Refer to them whenever you call upon your Sony dealer regarding this product. Transmitter Headphones Right channel (red) Left channel (white) Setting up the headphones 1 Open the battery compartment lid on the left outer side of the head band. Charging the headphones’ batteries Connecting cord (supplied) 3 Put on the headphones and the power turns on automatically. unimatch plug adaptor (supplied) to headphones jack (stereo phone jack) to headphones jack (stereo mini jack) Discman , MD , WALKMAN* , VCR , etc. Using the headphones for the first time The headphones are powered by either supplied rechargeable batteries or commercially available size AA (R6) batteries. When you use the headphones with the supplied rechargeable batteries NC-AA-HJ for the first time, charge the batteries in the following manner. nC-AA-HJ is applicable only for Sony cordless/ wireless headphone systems. Distortion / If the transmitter is connected to the headphones jack, turn down the volume of the connected audio/video equipment. / The headphones’ POWER indicator light is weak or turned off. €¢ Charge the rechargeable batteries or if the POWER indicator is still off after charging the batteries, replace them with new NC-AA-HJ batteries. You may not hear the beginning of the sound from the headphones until the transmitter starts sending the RF signals after detecting an audio signal. Note If the transmitter is connected to the headphones jack of the source equipment, set the volume of that equipment as high as possible without distorting the audio signal. 2 Place the new ear pad on the driver unit and insert the edge of the pad into the groove as illustrated. English WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. WARNING You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Notes on receiving performance The system for this equipment utilizes very high frequency signals in the 900 MHz band so the receiving performance may deteriorate due to the surroundings. The following examples illustrate conditions that may reduce the possible receiving range or cause interference with reception. €¢ Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc. €¢ Noise or interfering signals exist in the surroundings due to wireless communication systems installed along roadways. connecting cord (supplied) Left channel (white) Right channel (red) 3 Close the battery compartment. Make sure that the entire edge of the ear pad is securely inserted into the groove. [. . . ] If you experience a ringing in your ears, reduce the volume or discontinue use. This will allow you to hear outside sounds and to be considerate to the people around you. If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer. 0 MHz Channel Ch1, Ch2, Ch3 Modulation FM stereo Frequency response 18 – 22, 000 Hz AC power adaptor (supplied) 5 ( Getting started Unpacking Check that you have the following items: • • • • • The transmitter Ni-Cd rechargeable batteries NC-AA-HJ AC power adaptor The headphones Unimatch plug adaptor (stereo mini jack n stereo phone plug) • Connecting cord (phono plugs ˜ stereo mini plug), 1 m Press the OFF/CHG•POWER ON switch so that the OFF/CHG indicator lights up green. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY LCJ-RXB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY LCJ-RXB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.