User manual SONY KDL32EX402AEP

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY KDL32EX402AEP. We hope that this SONY KDL32EX402AEP user guide will be useful to you.


SONY KDL32EX402AEP : Download the complete user guide (4183 Ko)

Manual abstract: user guide SONY KDL32EX402AEP

Detailed instructions for use are in the User's Guide.

[. . . ] Intel® Desktop Board DP55SB Technical Product Specification September 2009 Order Number: E70714-001US The Intel® Desktop Board DP55SB may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board DP55SB Specification Update. Revision History Revision -001 Revision History First release of the Intel Desktop Board DP55SB Technical Product Specification ® Date September 2009 This product specification applies to only the standard Intel® Desktop Board DP55SB with BIOS identifier KGIBX10J. Changes to this specification will be published in the Intel Desktop Board DP55SB Specification Update before being incorporated into a revision of this document. [. . . ] 0 requirements European Union ErP by drawing ~52mA on the 5V STBY PS rail while in S5 power state 38 2 2. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash device), and chipset overhead resides above the top of DRAM (total system memory). On a system that has 16 GB of system memory installed, it is not possible to use all of the installed memory due to system address space being allocated for other system critical functions. These functions include the following: • • • • • • • BIOS/SPI Flash device (16 Mbit) Local APIC (19 MB) Direct Media Interface (40 MB) Front side bus interrupts (17 MB) PCI Express configuration space (256 MB) PCH base address registers PCI Express ports (up to 256 MB) Memory-mapped I/O that is dynamically allocated for PCI Conventional and PCI Express add-in cards (256 MB) The board provides the capability to reclaim the physical memory overlapped by the memory mapped I/O logical address space. The board remaps physical memory from the top of usable DRAM boundary to the 4 GB boundary to an equivalent sized logical address range located just above the 4 GB boundary. All installed system memory can be used when there is no overlap of system addresses. System Memory Map Address Range (decimal) 1024 K - 16777216 K 960 K - 1024 K 896 K - 960 K 800 K - 896 K Address Range (hex) 100000 - 3FFFFFFFF F0000 - FFFFF E0000 - EFFFF C8000 - DFFFF Size 16382 MB 64 KB 64 KB 96 KB Description Extended memory Runtime BIOS Reserved Potential available high DOS memory (open to the PCI Conventional bus). Video memory and BIOS Extended BIOS data (movable by memory manager software) Extended conventional memory Conventional memory 640 K - 800 K 639 K - 640 K 512 K - 639 K 0 K - 512 K A0000 - C7FFF 9FC00 - 9FFFF 80000 - 9FBFF 00000 - 7FFFF 160 KB 1 KB 127 KB 512 KB 2. 2 Connectors and Headers CAUTION Only the following connectors and headers have overcurrent protection: back panel and front panel USB, as well as IEEE 1394a. The other internal connectors and headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors or headers to power devices external to the computer’s chassis. A fault in the load presented by the external devices could cause damage to the computer, the power cable, and the external devices themselves. Furthermore, improper connection of USB or 1394 header single wire connectors may eventually overload the overcurrent protection and cause damage to the board. The connectors can be divided into these groups: • • Back panel I/O connectors Component-side I/O connectors and headers (see page 43) 41 Intel Desktop Board DP55SB Technical Product Specification 2. 1 Back Panel Connectors Figure 10 shows the location of the back panel connectors for the board. Item A B C D E F G H I J K L M N O Description eSATA port Back-to-BIOS button S/PDIF in (optical) S/PDIF out (optical) USB ports IEEE 1394a connector USB ports LAN USB ports Surround left/right channel audio out Side Surround Center channel and LFE (subwoofer) audio out Audio line in/(Side Surround) audio out Front left/right channel audio out/Two channel audio line out Mic in Figure 10. Back Panel Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only. Poor audio quality occurs if passive (non-amplified) speakers are connected to this output. 2 Component-side Connectors and Headers Figure 11 shows the locations of the component-side connectors and headers. 0 x16 connector Vertical USB connector Processor core power connector (2 x 4) Processor fan header Main power connector (2 x 12) Front panel header Back panel CIR emitter (output) header Front panel CIR receiver (input) header Alternate front panel power LED header Front chassis fan header USB 2. 0 header IEEE 1394a front panel header SATA connectors Chassis intrusion header Auxiliary PCI Express graphics power connector (SATA-style) 44 Technical Reference 2. Processor, Front and Rear Chassis (4-Pin) Fan Headers Pin 1 2 3 4 Note: Signal Name Ground (Note) +12 V FAN_TACH FAN_CONTROL These fan headers use Pulse Width Modulation control for fan speed. [. . . ] This product follows the provisions of the European Directives 2004/108/EC and 2006/95/EC. 3 Product Ecology Statements The following information is provided to address worldwide product ecology concerns and regulations. 1 Disposal Considerations This product contains the following materials that may be regulated upon disposal: lead solder on the printed wiring board assembly. 2 Recycling Considerations As part of its commitment to environmental responsibility, Intel has implemented the Intel Product Recycling Program to allow retail consumers of Intel’s branded products to return used products to selected locations for proper recycling. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY KDL32EX402AEP




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY KDL32EX402AEP will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.