User manual SONY BLT-CHM1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SONY BLT-CHM1. We hope that this SONY BLT-CHM1 user guide will be useful to you.


SONY BLT-CHM1 : Download the complete user guide (2437 Ko)

You may also download the following manuals related to this product:

   SONY BLT-CHM1 ANNEXE 1 (1723 ko)

Manual abstract: user guide SONY BLT-CHM1

Detailed instructions for use are in the User's Guide.

[. . . ] 4-562-672-01(1)  下記の注意を守らないとけが をしたり周辺の物品に損害を 与えたりすることがあります。 子どもの手の届かない場所に設置する Note Hair or the brim of a cap may shadow the camera (vignetting). In that case, move the camera to a position out of shadow or of minimum influence. [. . . ] (-) 2 Open the clip and mount by inserting into the edge of the cap. (-) Note Handle with care to avoid chipping with the clip teeth. 3 Adjust the longitudinal inclination angle (tilt angle) of the camera with the insertion angle. (-) Note The clip may fall off if the insertion amount of the clip is insufficient. Adjust the angle within the scope in which all the teeth are inserted. 4 Loosen the dial screw A, adjust the transverse inclination angle (roll angle) of the camera, and after finishing the adjustment, tighten the dial screw A to fix the camera. (-) Note The clip may fall off due to sharp head movement or strong impact to the clip, resulting in damage. During intense operations, use the included head band on the hook to prevent falling of the clip. , The Heights, Brooklands, Weybridge, Surrey KT13 0XW, Wielka Brytania Informacje o zgodności produktu z wymaganiami UE: Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Niemcy Using the included head band or a goggle strap to attach to the head (See fig. Pass the head band through the fall prevention hook that is longitudinal to the clip. [. . . ] (-) 4 Loosen the dial screw A, adjust the transverse inclination angle (roll angle) of the camera, and after finishing the adjustment, tighten the dial screw A to fix the camera. Stram pandebåndet tilstrækkeligt, og kontroller, at det ikke er for stramt eller for løst. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SONY BLT-CHM1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SONY BLT-CHM1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.