User manual SOLAC AS3240

[. . . ] This appliance is not to be used by persons (or children) whose physical, sensorial or mental capacities are impaired, or who have no experience or knowledge, unless supervised or instructed in the use of the appliance by a person responsible for their safety. In the event of any anomaly in the cord or any other part of the appliance, do not use it and take it to an authorised service centre. Do not use any parts or accessories not supplied or recommended by SOLAC. Before plugging the appliance into the mains, check that the indicated voltage is the same as in your home. [. . . ] Whenever you want to remove the hose, pull it outwards while simultaneously pressing the release button (12). You can use it for all kinds of floors, given that it is retractable so that it can be adapted to the surface to be vacuumed. to change the cleaning position , press the brush button (28) with your foot. We recommend cleaning hard floors, wood and parquet with the fibre brush extended, and cleaning carpets and rugs with the fibre brush retracted. We recommend using it on both parquet and hard floors (tile, ceramic, marble, etc. Simultaneously pull upwards or downwards on the top part until the desired tube length is reached. If necessary, the cord can be pulled out to the red mark, but not any further. 7 Turn on the vacuum by pressing the pedal switch (3), and adjust the suction power by opening or closing the regulator on the handle (14). (The suction power is decreased by opening the valve, and it is increased by closing the valve). You can also adjust the suction power using the electronic regulator (6). ) If you hear a sharp whistling sound that is different from the normal sound when using the vacuum, turn it off and unplug it. , This appliance has a position called the "horizontal parking" position, which can be conveniently used during stops while cleaning. To put it in this position, insert the hook of the telescopic tube in the groove (5) of the vacuum cleaner body (Figure 1). , If you wish, you can place the suction head (34) and the furniture brush (31) in the attachment holder (26). 8 When finished, switch the appliance off by pressing the On/Off button (3). Hold the cord plug in your hand to prevent it from banging against the vacuum cleaner housing. , To save space when the vacuum is stored, attach the telescopic tube to the body of the vacuum using the hook (26) (Figure 2). Press the release button (20), and empty its contents into the rubbish bin (Figure 4). 3 Remove the cyclone filter (22) from the interior of the dust container by turning it clockwise (Figure 5). Empty its contents, rinse the filter with tap water, and be sure that all washed elements are completely dry before installing them again. [. . . ] 4 Rinse the HEPA protector filter in warm water, and allow it to dry completely. 5 Remove the motor protection filter (16), rinse it, and allow it to dry completely. ) Clean the appliance before using it for the first time, immediately after each use and After not using it for a long period of time. You will thus ensure the correct operation of the appliance and prolong its useful life. [. . . ]