User manual SOLAC AE2510

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SOLAC AE2510. We hope that this SOLAC AE2510 user guide will be useful to you.


SOLAC AE2510 : Download the complete user guide (577 Ko)

Manual abstract: user guide SOLAC AE2510

Detailed instructions for use are in the User's Guide.

[. . . ] IMPORTANT: Before using the appliance for the first time, charge the battery for a minimum of 15 hours to reach full charge. The batteries for using the appliance must be replaced only by a technical service approved by the manufacturer. This appliance is not intended for use by children or other persons without assistance or supervision if their physical sensory or mental capabilities present then from using if safety. [. . . ] 1 Insert the handle (1) in the opening on the main body of the broom (3) and fasten both parts together by tightening the fastening screw (15) with a coin. 2 Make sure the dust canister (6) and filters (9 and 10) are installed correctly. 3 Insert the multi-purpose brush (11) into the suction nozzle and press it in until you hear a click. 5 Once you have finished cleaning, turn the broom off by sliding the on/off button (2) up. Important: After each use, place the broom on the charger (13) to keep the suction power at peak level. This makes sure the battery is fully charged ready for the next time it is used. CLEANING THE DUST CANISTER AND FILTERS Befote starting to clean and maintain the appliance, make sure you have unplugged the appliance. When the dust stored in the canister reaches the maximum level mark (8), you should empty the canister. To ensure the continued top-quality performance of your appliance, we recommend cleaning the canister and filters after each use. When you need to empty the dust canister, disconnect the appliance and proceed as follows: 1 Press the canister removal button (7) upwards and remove the canister. Shake the filter out in the rubbish bin, banging it lightly against the sides of the bin until no more dust falls off. 4 Once you have removed the filters from the canister, empty the canister into the rubbish bin. 5 If it is excessively dirty, wash the dust canister and filters under running water with a gentle detergent. Important: make sure they are completely dry before fitting them back in the canister. 6 Insert the protective filter (9) in the dust canister, making sure the air inlet hole on the filter coincides with the air inlet nozzle on the canister. To do this, make sure the air inlet hole on the canister coincides with the suction nozzle hole. Press it in place until the canister removal button (7) is in the correct position. Used batteries should not be thrown away with domestic rubbish; they should be disposed of separately. [. . . ] If the appliance has been taken apart or altered by anyone outside the technical service centres authorised by SOLAC. The warranty shall not cover deterioration due to normal use of the product. If the breakdown is the result of lime scale in the water, because it has been knocked or dropped or due to the use of harmful, chemical, obstructive or corrosive products. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SOLAC AE2510




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SOLAC AE2510 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.