User manual SITECOM WIRELESS ROUTER 54G WL-607

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SITECOM WIRELESS ROUTER 54G WL-607. We hope that this SITECOM WIRELESS ROUTER 54G WL-607 user guide will be useful to you.


SITECOM WIRELESS ROUTER 54G WL-607 : Download the complete user guide (2587 Ko)

You may also download the following manuals related to this product:

   SITECOM WIRELESS ROUTER 54G WL-607 DATASHEET (1241 ko)

Manual abstract: user guide SITECOM WIRELESS ROUTER 54G WL-607

Detailed instructions for use are in the User's Guide.

[. . . ] WL-600/607 Wireless Broadband Router (802. 11bg) 1 Introduction Congratulations on purchasing this Wireless Broadband Router. This Wireless Broadband Router is a cost-effective IP Sharing Router that enables multiple users to share the Internet through an ADSL or cable modem. Simply configure your Internet connection settings in the Wireless Broadband Router and plug your PC to the LAN port and you're ready to share files and access the Internet. As your network grows, you can connect another hub or switch to the router's LAN ports, allowing you to easily expand your network. [. . . ] When the protection mode is enabled, the throughput of the AP will be a little lower due to many of frame traffic should be transmitted. Data Rate Preamble Type Broadcast ESSID IAPP 802. 11g Protection Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router. 25 3. 3 Security This Access Point provides complete wireless LAN security functions, include WEP, IEEE 802. 11x, IEEE 802. 11x with WEP, WPA with pre-shared key and WPA with RADIUS. With these security functions, you can prevent your wireless LAN from illegal access. Please make sure your wireless stations use the same security function. 3. 3. 1 WEP only When you select 64-bit or128-bit WEP key, you have to enter WEP keys to encrypt data. Then the router can receive any packets encrypted by one of the four keys Parameters Key Length Description You can select the WEP key length for encryption, 64-bit or 128-bit. Larger WEP key length will provide higher level of security, but the throughput will be lower. You may select to select ASCII Characters (alphanumeric format) or Hexadecimal Digits (in the "A-F", "a-f" and "0-9" range) to be the WEP Key. For example: ASCII Characters: guest Key Format 26 Hexadecimal Digits: 12345abcde Default Key Select one of the four keys to encrypt your data. Only the key you select it in the "Default key" will take effect. The WEP keys are used to encrypt data transmitted in the wireless network. 64-bit WEP: input 10-digit Hex values (in the "AF", "a-f" and "0-9" range) or 5-digit ASCII character as the encryption keys. 128-bit WEP: input 26-digit Hex values (in the "A-F", "a-f" and "0-9" range) or 13-digit ASCII characters as the encryption keys. Key 1 - Key 4 Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place) 3. 3. 2 802. 1x only IEEE 802. 1x is an authentication protocol. Every user must use a valid account to login to this Access Point before accessing the wireless LAN. This mode only authenticates user by IEEE 802. 1x, but it does not encryption the data during communication. Parameters RADIUS Server IP address RADIUS Server Port RADIUS Server Password Description The IP address of external RADIUS server. The password used by external RADIUS server. Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place) 3. 3. 3 802. 1x WEP Static key IEEE 802. 1x is an authentication protocol. Every user must use a valid account to login to this Access Point before accessing the wireless LAN. This mode also uses WEP to encrypt the data during communication. For the WEP settings, please refer to section 2. 4. 3. 1 "WEP only". For the 802. 1x settings, please refer to section 2. 4. 3. 2 "802. 1x only". 27 3. 3. 4 WPA Pre-shared key Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-shared key to authenticate wireless stations and encrypt data during communication. This can improve security very much. Parameters WPA(TKIP) WPA2(AES) Description TKIP can change the encryption key frequently to enhance the wireless LAN security. [. . . ] This is a convenient and efficient method for routers to route IP packets to their destination. The ISP Gateway Address is an IP address for the Internet router located at the ISP's office. 45 ISP: Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations. A LAN is a group of computers and devices connected together in a relatively small area (such as a house or an office). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SITECOM WIRELESS ROUTER 54G WL-607




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SITECOM WIRELESS ROUTER 54G WL-607 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.