User manual SIEMENS LC457CA60/02

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SIEMENS LC457CA60/02. We hope that this SIEMENS LC457CA60/02 user guide will be useful to you.


SIEMENS LC457CA60/02 : Download the complete user guide (1813 Ko)

You may also download the following manuals related to this product:

   SIEMENS LC457CA60/02 (2201 ko)
   SIEMENS LC457CA60/02 (2201 ko)
   SIEMENS LC457CA60/02 (2201 ko)
   SIEMENS LC457CA60/02 (2201 ko)
   SIEMENS LC457CA60/02 (680 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (818 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (818 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (818 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (818 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)
   SIEMENS LC457CA60/02 INSTALLATION INSTRUCTIONS (2901 ko)

Manual abstract: user guide SIEMENS LC457CA60/02

Detailed instructions for use are in the User's Guide.

[. . . ] If no activated carbon filter is installed, it is not possible to bind the odorous substances in the cooking vapours. 3 Before using for the first time Important notes: The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. The appliance may be connected to the mains by a qualified technician only. [. . . ] Important: Metal filters that are saturated with grease should not be washed together with other dishes etc. When cleaning the filters by hand, soak them in hot soapy water first of all. Then brush the filters clean, rinse them thoroughly and leave the water to drain off. 5 Filters and maintenance Removing and inserting the metal grease filters: 1. Press the catch on the grease filters inwards and fold the filters down. At the same time take hold of the underside of the grease filters with your other hand. Remove the metal filters (see "Removing and inserting the metal grease filters"). Insert an activated carbon filter on the right and left of the fan motor and rotate the filters until they lock into position. 1. 2. Insert the grease filters (see removal and installation of the metal-mesh grease filters). Replacing the activated carbon filters: During normal operation (1 to 2 hours per day) the activated carbon filters should be replaced approximately 1 x year. The activated carbon filters are available from specialist outlets (see Optional accessories). Disposal of old activated carbon filters: Activated carbon filters do NOT contain any harmful substances. Additional information concerning gas cookers: When installing gas hotplates, comply with the relevant national statutory regulations (e. g. Always comply with the currently valid regulations and installation instructions supplied by the gas appliance manufacturer. Only one side of the extractor hood may be installed next to a high-sided unit or high wall. Minimum distance on gas hotplates between the upper edge of the trivet and lower edge of the extractor hood: 650 mm, Fig. 1. 8 Prior to installation Exhaust-air mode The exhaust air is discharged upwards through a ventilation shaft or directly through the outside wall into the open. D Exhaust air should neither be directed into a smoke or exhaust flue that is currently used for other purposes, nor into a shaft that is used for ventilating rooms in which stoves or fireplaces are also located. Exhaust air may be discharged in accordance with official and statutory regulations only (e. g. Local authority regulations must be observed when discharging air into smoke or exhaust flues that are not otherwise in use. D When the extractor hood is operated in exhaust-air mode simultaneously with a different burner which also makes use of the same chimney (such as gas, oil or coal-fired heaters, continuous-flow heaters, hot-water boilers) care must be taken to ensure that there is an adequate supply of fresh air which will be needed by the burner for combustion. Safe operation is possible provided that the underpressure in the room where the burner is installed does not exceed 4 Pa (0. 04 mbar). This can be achieved if combustion air can flow through non-lockable openings, e. g. in doors, windows and via the airintake/exhaust-air wall box or by other technical measures, such as reciprocal interlocking, etc. [. . . ] Draw a line on the wall from the ceiling to the lower edge of the hood at the centre of the location where the hood is going to be mounted. Ensure that the minimum distance between the hob and the extractor hood is maintained ­ 550 mm for an electric hob and 650 mm for a gas hob. The bottom edge of the template equates to the lower edge of the extractor hood. 8 mm) for the brackets for fixing the flue ducts and insert wall plugs flush with the wall. 27 228 Note: Take into account any special accessories that are going to be fitted. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SIEMENS LC457CA60/02




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIEMENS LC457CA60/02 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.