User manual SIEMENS GIGASET C340

[. . . ] Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / overview. fm / 14. 9. 05 Handset at a glance Handset at a glance 1 INT 1 V 2 05. 08. 16 14:30 §§§§INT§§§ §§Menu 12 11 10 3 4 5 9 8 6 7 1 Display in idle status 2 Battery charge condition = e V U (empty to full) = flashes: battery nearly empty e V U flashes: battery charging 3 Control key (page 8) 4 Message key Opens calls lists. 5 End call key, On/Off key End call, cancel function, go back one menu level (short press), back to idle status (long press), activate/deactivate handset (long press in idle status) 6 Hash key Keypad lock on/off (long press, page 7) 7 Microphone 8 Recall key Enter recall (long press) 9 Star key Ringers on/off (long press in idle status), Enter dial pause (long press when dialling), Switch between upper/lower case letters and digits for text entry (page 28) 10 Talk key Answer a call, open last number redial list (short press), start dialling (long press) 11 Handsfree Key Switch between earpiece and handsfree mode; Lights up: handsfree activated; Flashes: incoming call 12 Timer key (page 23) Start and end timer 1 Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / C340_laender_IVZ. fm / 14. 9. 05 Contents Contents Handset at a glance . 17 17 18 18 19 19 19 19 21 21 21 21 21 22 22 23 23 Handset settings . 26 26 26 27 2 Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / C340_laender_IVZ. fm / 14. 9. 05 Contents Default settings . [. . . ] You just have to long press 1 followed by the phone number. Storing an IP number You can store an IP number with a maximum of 32 digits/letters in your handset. §Menu§ ¢ IP dialing function Set key 1 ¢ IP Number ¢ §OK§ ~ Enter the IP access number. Long press star key P to insert "P" for pause if it is needed during the input. Notes: ­ How to correct wrong input, see page 9. ­ The procedure above varies depending on the IP card used. IP dialling Perform a long-distance call via IP: 1 Long press. ~/s Enter the phone number or open the directory and select an entry. 16 Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / registration. fm / 14. 9. 05 Using several handsets Using several handsets Registering handsets You can register up to four handsets on your base unit. After it has registered, the handset returns to idle status. If the handset has not registered within this time, repeat the process. Automatic registration of a Gigaset M56 handset to a Gigaset M56 base station Important: The handset must not already be registered to any base unit. ¤ Place the handset in the charging cradle of the base unit with its display facing forward. While this is happening, Registering appears in the display and the name of the base, Base 1, flashes. When the handset has registered, this number appears in the display, e. g. This means that the handset has been allocated the first internal number. If all internal numbers 1­4 have been assigned (four handsets are registered on a base), the number 4 is overwritten if that handset is in idle status. ¢ Settings ¢ Handset ¢ Register Handset ~ Enter the system PIN of the base (the default is 0000) and press §OK§. Registering Base 1 flashing in the display. Menu§ On the handset On the base ÷ Press the registration/paging key on the base and hold for about 3 seconds. De-registering handsets From any registered Gigaset M56 handset you can de-register any other registered handset. §OK§ Press the control key. Notes: ­ Automatic registration is not possible when the base on which you wish to register the handset is being used to make a call. ­ The name of the handset can be changed (page 19). Looking for a handset ("paging") You can look for your handset with the help of the base. ¤ All handsets will ring together ("paging") even if their ringers are switched off. 17 Manually registration of a Gigaset M56 handset to a Gigaset M56 base station You must activate manual registration of the handset at both the handset and the base station. Gigaset C340 / CHIN eng / A31008-M1621-Y101-1-7619 / registration. fm / 14. 9. 05 Using several handsets End paging ÷/c Briefly press the registration/ paging key on the base or press the talk key on the handset. Making internal calls Internal calls to other handsets registered on the same base are free. When the internal party answers: ¤ Announce the outside call if you wish. The call will come back automatically if the internal party does not answer or is busy. Internal consultation calls While talking to an outside party, you can call an internal user to consult with him or her. s Select the required handset and press §OK§. Calling a specific handset INT sc Or: ~ Open list of internal users. Press the end call key. Ending a consultation call §Menu§ Calling all handsets ("group call") INT P Press the control key. You are reconnected with the external caller. End call a Accepting/rejecting call waiting If you receive an external call while conducting an internal call, you will hear the call waiting tone (a short beep). The caller's number will appear in the display if Calling Line Identification is enabled. Transferring a call to another handset You can transfer an external call to another handset. s Select a handset or Call All handsets and press §OK§. End internal call, accept external call: Press the control key. [. . . ] Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc. ). When it has fully dried out you will normally be able to use it again. ¥ ¥ Handset does not ring. When buying a replacement line cord, ensure that the line plug has the correct type of wiring (page 6). ¥ The other party cannot hear you. Cancel muting (page 11). Questions and answers If you have any queries about the use of your phone, you can contact us at ¥ www. siemens. com. cn/shc Or call to the hotline: +86-4006 706 007 The table below contains a list of common problems and possible solutions. The display is blank. [. . . ]