User manual SHARP XV-Z15000

[. . . ] XV-Z15000 PROJECTOR PROJECTEUR PROYECTOR PROJETOR OPERATION MANUAL MODE D'EMPLOI MANUAL DE MANEJO MANUAL DE OPERAO ENGLISH FRANAIS ESPAOL PORTUGUS SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. [. . . ] color adjustment screen. Picker Return *1 To specify the range of color correction, select "Effect" and press O or Q button. O button Q button Specifies smaller range. Specifies larger range. By continuing to press the adjustment buttons (P/R/O/Q), the picker moves rapidly. After selecting the color of the projected image to correct, press ENTER. (Go to step 3. ) *2 To check the appearance of the projected image, select "C. M. S. 1" (or "C. M. S. 2") and set to "On" or "Off". On The appearance of the projected image after above color adjustment reflected can be checked. The appearance of the projected image in former color adjustment can be checked. Off 4 To complete the C. M. S. color adjustment, select "Return" and press ENTER. Note The C. M. S. color adjustment can be made to one color each in "C. M. S. 1" and "C. M. S. 2". -38 Menu operation Page 34 8 Adjusting the Bright Boost Bright Boost uses Texas Instruments' Bright Boost technology. The image becomes brighter while the color reproduction is kept at a high level. Selectable items On Off Description The Bright Boost function is activated. The Bright Boost function is not activated. w Mosquito Noise Reduction (MNR) The so-called Mosquito Noise (flickering) can be reduced. Selectable items Off Level 1 Level 2 Level 3 Description MNR does not function. Sets the MNR level for viewing a clearer picture. 9 Selecting the Film Mode This function provides high-quality playback of images originally projected at 24 fps, such as movies on DVDs. Selectable items Auto Off Description Films are detected automatically. Films are not detected. Note Set "MNR" to "Off" in the following cases: When the image is blurry. This function can be set when the input signal is 480I/480P, 576I/576P, S-VIDEO or VIDEO. 0 Setting Detail Enhancement This function enhances the details in images and, thereby, creates a greater sense of depth. \ button | button Provides less detail enhancement. Provides more detail enhancement. e Resetting All Adjustment Items To reset all adjustment items to the default settings, select "Reset" and press ENTER. Reducing Image Noise (DNR) Video digital noise reduction (DNR) provides high quality images with minimal dot crawl and cross color noise. Selectable items Off Level 1 Level 2 Level 3 Description The DNR function is not activated. Sets the DNR level for viewing a clearer picture. Useful Features Note Set "DNR" to "Off" in the following cases: When the image is blurry. This function can be set when the input signal is 480I/480P, 576I/576P, S-VIDEO or VIDEO. -39 Computer Image Adjustment ("SIG-ADJ" Menu) Menu operation Page 34 The illustration shown here is for explanation and may be different from the actual on-screen display. Picture SIG-ADJ Clock Phase H-Pos V-Pos Reset Resolution Auto Sync Signal Type Video System Video Setup Dynamic Range SCR-ADJ 0 0 0 0 PRJ-ADJ Note Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see. ) Information on the currently selected input signal can be confirmed in item 8 on page 41. *1 *2 On Auto Auto 0 IRE Auto 3 Auto Sync (Auto Sync Adjustment) Hz Signal Info : 1080P H : XX. X kHz/ SEL. /ADJ. RETURN V : XX. X ENTER END Selectable items On *1 If the input mode is S-VIDEO or VIDEO input, the display changes to the "Video System" screen. *2 Displayed when the input mode is HDMI input. Off Description Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not automatically performed. 1 Adjusting the Computer Image Use the SIG-ADJ function in case of irregularities such as vertical stripes or flickering in portions of the screen. Selectable items Clock Phase H-Pos V-Pos Description Adjusts vertical noise. Centers the on-screen image by moving it up or down. Note Auto Sync adjustment is also performed by pressing AUTO SYNC on the remote control. When setting "Auto Sync" to "Off", and if AUTO SYNC is pressed, Auto Sync will be executed in "On" mode. [. . . ] 25, 44 RS-232C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Saturation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 SCR-ADJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Security bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]