User manual SHARP XL-MP130H

[. . . ] MIKRO KOMPONENTEN SYSTEM MICRO-CHANE SISTEMA MICRO MIKRO KOMPONENT SYSTEM MICRO SISTEMI MICRO SYSTEEM SISTEMA DE MICRO COMPONENTE MICRO COMPONENT SYSTEM MODELL MODLE MODELO MODELL MODELLO MODEL MODELO MODEL Mikro Komponenten System XL-MP130H besteht aus XL-MP130H (Hauptgert) und CP-MP130H (Lautsprechersystem). Micro-chane XL-MP130H compose de XL-MP130H (appareil principal) et CPMP130H (enceinte acoustique). Sistema micro XL-MP130H que consta de XL-MP130H (aparato principal) y CPMP130H (sistema de altavoces). XL-MP130H mikro komponent system bestende av XL-MP130H (huvudenhet) och CP-MP130H (hgtalarsystem). [. . . ] To confirm the time display: [When the unit is in the stand-by mode] Press the CLOCK/TIMER button. Note: The "CLOCK" will appear or time will flash to confirm the time display when the AC power supply is restored after a power failure or unplugging the unit. To readjust the clock: Perform "Setting the clock" from step 1. If the "CLOCK" does not appear in step 3, step 4 (for selecting the 12-hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: 1 Clear all the programmed contents. [Refer to "Clearing all the memory (reset)" on page 42 for details. ] 2 Perform "Setting the clock" from step 1. Note: The clock can also be set with the remote control. 1 2 3 Press the ON/STAND-BY button to turn the power on. Within 10 seconds, press the or button to select "CLOCK", and press the MEMORY/SET button. 4 Press the or button to select 12-hour or 24hour display and then press the MEMORY/SET button. "0:00" "AM 12:00" "AM 0:00" The 24-hour display will appear. (AM 0:00 - PM 11:59) Basic Operation 8 E-12 XL-MP130H Listening to a CD or MP3/WMA disc This system can play back a standard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. Some audio CD-R and CD-RW discs may not be playable due to the state of the disc or the device that was used for recording. MP3 is a type of audio code which is processed by significant compression from the original audio source with very little loss in sound quality. During VBR file playback, time counter in the display may differ from its actual playback time. WMA: WMA files are Advanced System Format files that include audio files which are compressed with Windows Media Audio codec. WMA is developed by Microsoft as an audio format file for Windows Media Player. "MP3" or "WMA" indicator will light up after the unit reads information on an MP3 or WMA disc. Auto power on function: When you press any of the following buttons, the unit turns on. CD button (main unit and remote control): The unit turns on and the "CD" function is activated. CD / button on the remote control: The unit turns on and CD playback starts (regardless of the last function). / button on the main unit: The unit turns on and playback of the last function starts (CD, TAPE, TUNER, VIDEO/AUX). Auto power off function: In the stop mode of CD, MP3 or WMA operation, the main unit enters the stand-by mode after 15 minutes of inactivity. ENGLISH CD or MP3/WMA disc Playback ASPM PTY. TI SEARCH DISPLAY MODE AUTO REVERSE XL-MP130 E-13 XL-MP130H ENGLISH 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the 1 button and within 5 seconds, press the OPEN/CLOSE button to open the disc tray 1. 12 cm (5") 8 cm (3") Playback will begin from track 1 on DISC 1. [. . . ] Do not open the compartment with great force. ENGLISH Tuner Symptom The radio makes unusual noises continuously. Move the aerial away from the AC power lead if it's located nearby. Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc. ) or on the transmitter on the remote control. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. References Remote control Symptom The remote control does not operate. [. . . ]