User manual SHARP XL-DH259P

[. . . ] ENGLISH MODEL XL-DH259P MICRO COMPONENT SYSTEM OPERATION MANUAL XL-DH259P Micro Component System consisting of XL-DH259P (main unit) and CP-DH259P (speaker system). iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc. , registered in the U. S. and other countries. M I C RO COM PON ENT SYST EM XL-DH259 "Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Accessories Please confirm that the following accessories are included. iPhone adaptor x 2 Remote control x 1 RRM CGA 232 AWS A AM loop aerial x 1 FM aerial x 1 Special Notes Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. This product is classified as a CLASS 1 LASER PRODUCT Caution - Use of any controls, adjustments or procedures other than those specified herein may result in hazardous radiation exposure. SHARP ELECTRONICS OF CANADA LTD. [. . . ] (CD/USB ) button to start playback. To cancel the programmed play mode: During programmed stop mode, press the (CD/USB ) button. The display will show "MEM CLEAR" and all the programmed contents will be cleared. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. Press the MEMORY button repeatedly to go to the last programme memory. The new tracks will be stored after the last track of the previous programme. Album display Artist display Note: If "NO SUPPORT" is displayed, it means "Copyright protected WMA file" or "Not supported playback file" is selected. E-8 Listening to USB mass storage device/MP3 player To remove USB memory device 1 Press the (CD/USB ) button to stop playback. Notes: SHARP will not be held liable for the loss of data whilst the USB memory device is connected to the audio system. Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal. SHARP cannot guarantee that all USB memory devices will work on this audio system. USB cable is not recommended for use in this audio system to connect to USB memory device. Use of the USB cable will affect the performance of this audio system. The USB terminal in this unit is not intended for a PC connection but is used for music streaming with a USB memory device. If the data inside the USB memory is large, it may take longer time for the data to be read. If unplayable file is played on this product, "NO SUPPORT" is indicated and the file will be automatically skipped. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again. It may however face some irregularities due to various unforeseen reasons from some devices. The USB port is only intended for direct connection to a USB memory device without any cable. During CD function, MP3 player will not be charging. Note: This product is not compatible with MTP and AAC file systems from USB mass storage device or MP3 player. To play back USB/MP3 player with folder mode off 1 Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. Connect the USB memory device that has MP3/WMA format files on the unit. When the USB memory is connected to the main unit, the device information will be displayed. 2 Select desired file to be played back by pressing the or button. 3 Press the (CD/USB ) button. Title, Artist and Album name are displayed if they are recorded in the USB memory device. Display content can be changed by pressing the DISPLAY button. Note: To pause playback: (CD/USB Press the ) button. To play back USB/MP3 player with folder mode on 1 Press the USB button on the remote control or FUNCTION button repeatedly on main unit to select USB function. [. . . ] Does the remote control sensor receive strong light? Tuner Symptom The radio makes unusual noises continuously. Move the aerial away from the AC power lead if it is located nearby. E-13 Troubleshooting chart (continued) USB Symptom Device cannot be detected. Is the File Name written in Chinese or Japanese characters? If problem occurs during operation When this product is subject to strong outdoor interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. [. . . ]