User manual SHARP XL-1200

[. . . ] Q CAUTION Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Z Please ensure that the equipment is positioned in a well-ventilated area and that there is at least 10 cm (4") of free space along the sides and back. There must also be a minimum of 30 cm (12") of free space on the top of the unit. [. . . ] The remote control can be used within the range shown below: Press the ON/STAND-BY button. Precautions for battery use: z Replace all old batteries with new ones at the same time. Z Remove the batteries if the unit will not be used for long periods of time. Z Installing the batteries incorrectly may cause the unit to malfunction. Z Periodically clean the transmitter on the remote control and the sensor on the unit with a soft cloth. Z Exposing the sensor on the unit to strong light may interfere with operation. Z Keep the remote control away from moisture, heat, shock, and vibrations. , , To turn the power on Press the ON/STAND-BY button to turn the power on. When the power is turned on, you can open or close the CD compartment cover by pressing the (OPEN/CLOSE) button. Main unit operation: 1 Press the BASS/TREBLE button until "BASS" appears on the display. Main unit operation: 1 Press the BASS/TREBLE button until "TRE" appears on the display. If it is left open, the lens may be covered with dust and the unit may not operate properly. Z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. , , To locate the beginning of a track To move to the beginning of the next track: Press the button for less than 0. Z You can skip to any track by pressing the button repeatedly until the desired track number appears. Z You can skip to any track by pressing the button repeatedly until the desired track number appears. For audible fast forward: Press and hold down the For audible fast reverse: Press and hold down the button during playback. To repeat a programmed sequence: Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat playback. Notes: z In random play, the CD player will select and play tracks automatically. ) z If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. Caution: After performing repeat or random play, be sure to press the ton. [. . . ] You can store 30 AM and FM stations in memory and recall them at the push of a button. Within 5 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1. Within 5 seconds, press the MEMORY/SET (MEMORY) button to store that station in memory. [. . . ]