User manual SHARP XG-NV5XU

[. . . ] 24 Setting Auto Logout Time (ADVANCED[1]Auto Logout Time) . . . . . . . . . . . . . 24 Carrying out Network Ping Test (ADVANCED[5]Network Ping Test) . . . . . . . . . . . . 25 Setting of Accept IP Address (ADVANCED[6]Accept IP Addr(1) ­ [8]Accept IP Addr(3)) . . . . . . . . . . . . . . . . . 25 Accepting All IP Addresses (ADVANCED[9]Accept All IP Addr) . . . . . . . . . . . . [. . . ] · You can input the characters below : a-z, A-Z, 0-9, -, _ Note · If you click the "Refresh" button before the screen is displayed completely, an error message ("Server Busy Error") will be displayed. · You cannot operate this page while the projector is warming up. · For details about each item, refer to the projector's operation manual. -14 Controlling the Projector via LAN Making General Settings for the Network (Network General) Setting for Sending E-mail when an Error Occurs (Mail ­ Originator Setting) On this screen, you can make settings for sending e-mail to report when the projector has generated an error. On this screen, you can make general settings relating to the network. Items Projector Name Auto Logout Time Description Setting the projector name. Setting the time interval in which the projector will be automatically disconnected from the network in units of a minute (from 1 to 65535 minutes). Setting the TCP port number used when exchanging a data with the projector (from 1025 to 65535). Setting the port number used when searching for the projector (from 1025 to 65535). Items SMTP Server Setting example / Remarks Setting an SMTP server address for e-mail transmission. e. g. 1 : 192. 168. 150. 253 e. g. 2 : smtp123. sharp. co. jp * When using a domain name, make settings for the DNS server. The name set here appears in the "Originator Name" column of the body of the message. Originator E-mail Address Originator Name Data Port Search Port Note · SMTP Server, Originator E-mail Address and Originator Name can be up to 64 characters. · You can input the characters below: SMTP Server and Originator E-mail Address : a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |, }, ~, _, ', . , @, ` (You can input "@" only one time for "Originator E-mail Address". ) Originator Name : a-z, A-Z, 0-9, -, _, (, ), space After clicking the "Apply" button, the set values appear. (Page 21) advanced> [1]Auto Logout Time (Factory default setting : 5 minutes) Setting of time until automatic disconnection of network connection. (Page 24) [2] Data Port (Factory default setting : 10002) Setting the TCP port number used when exchanging data. (Page 24) [5]Network Ping Test It is possible to confirm that a network connection between the projector and a computer etc. (Page 25) [6] Accept IP Addr(1) [7]Accept IP Addr(2) [8]Accept IP Addr(3) [9]Accept All IP Addr (Factory default setting : Accept All) For improved security, it is possible to set up to three IP addresses allowing connection to the projector. (Page 25) [0] Search Port (Factory default setting : 5006) Setting the port number used when searching for the projector. ]Restore Default Setting Restores all setting values that can be set using the menu to the default state. (Page 26) -19 Controlling the Projector Using RS-232C or Telnet Enter number or symbol of item to be selected on the SETUP MENU. Setting is carried out one item at a time, and saved at the end. View Setting Detail List ([V]View All Setting) SETUP MENU ---------------------------------SETUP MENU-------------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup>v Model Name : XG-NV5XU Projector Name : XG-NV5XU MAC Address : 08:00:1f:b1:b7:74 IP Address : 192. 168. 150. 2 Subnet Mask : 255. 255. 255. 0 Default Gateway : Not Used RS-232 Baud Rate : 9600 bps Password : Not Required **********(Advanced Status)********** Data Port : 10002 Accept IP Address : Accept All Auto Logout Time : 5 minutes Search Port : 5006 Set Items Example: When setting IP Address (change from 192. 168. 150. 2 to 192. 168. 150. 3) SETUP MENU ---------------------------------SETUP MENU-------------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup>1 IP Address : 192. 168. 150. 2 Please Enter : 192. 168. 150. 3 (change) --> 192. 168. 150. 3 ---------------------------------SETUP MENU-------------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup>v Model Name : XG-NV5XU Projector Name : XG-NV5XU MAC Address : 08:00:1f:b1:b7:74 IP Address : 192. 168. 150. 3 Subnet Mask : 255. 255. 255. 0 Default Gateway : Not Used RS-232C Baud Rate : 9600 bps Password : Not Required **********(Advanced Status)********** Data Port : 10002 Accept IP Address : Accept All Busy Reply : ERR+<CR> code Input Hold Time : 1000 milliseconds Auto Logout Time : 5 minutes Search Port : 5006 1 1 *1 2 *2 * 3 1 Enter "v" and press the "Enter" key. Display all setting values(*). *3 1 Enter "1" (number of item to be set), and press the "Enter" key. 3 Enter "v" and press the "Enter" key to verify setting detail list. IP address is being changed (*3). Note · Verification of setting detail list can be omitted. [. . . ] \ Check that the LAN cable is a cross-over cable when connecting the projector to a computer directly. \ Check that the LAN cable is a straight-through cable when connecting the projector with a network device such as a hub. \ Check that the power supply is turned on for the network device such as a hub between the projector and a computer. Check the network settings for the computer and the projector \ Check the following network settings for the projector. · IP Address Check that the IP address for the projector is not duplicated on the network. [. . . ]