User manual SHARP XG-560W SETUP MANUAL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP XG-560W. We hope that this SHARP XG-560W user guide will be useful to you.


SHARP XG-560W SETUP MANUAL: Download the complete user guide (1710 Ko)

Manual abstract: user guide SHARP XG-560WSETUP MANUAL

Detailed instructions for use are in the User's Guide.

[. . . ] In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: WARNING: THIS APPARATUS MUST BE EARTHED. [. . . ] If your audio-visual equipment has a component output terminal, use the COMPUTER/ COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection. When using a 3 RCA (Component) to 15-pin D-sub cable (INPUT1 or INPUT2) To audio output terminal To component output (Y, CB/PB, CR/PR) terminal DVD, etc. To INPUT1 terminal To AUDIO (INPUT1, 2) terminal 3 RCA (Component) to 15-pin D-sub cable (optional: AN-C3CP2) ø3. 5 mm minijack to RCA audio cable (commercially available) When using an S-video cable (INPUT3) To audio output terminal To S-video output terminal DVD, etc. To INPUT3 terminal To AUDIO (INPUT3, 4) terminal L R RCA audio cable (commercially available) S-video cable (commercially available) 24 When using a composite video cable (INPUT4) To audio output terminal To video output terminal DVD, etc. To INPUT4 terminal To AUDIO (INPUT 3, 4) terminal L R RCA audio cable (commercially available) Composite video cable (commercially available) Connections Connecting to a Monitor with RGB Input Terminal You can display computer images on both the projector and a separate monitor using two sets of RGB cables. Computer Monitor To INPUT 1 terminal To RGB output terminal To OUTPUT (INPUT 1, 2) terminal To RGB input terminal RGB cable RGB cable (commercially available) Note · RGB signals and Component signals can be output to the monitor. · For this connection, another RGB cable (commercially available) is required. 25 Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS232C adaptor and an RS-232C serial control cable (cross type, commercially available), the computer can be used to control the projector and check the status of the projector. See page 54 for detail. When connecting to a computer using an RS-232C serial control cable and a DIND-sub RS-232C adaptor Supplied accessory DIN-D-sub RS-232C adaptor To RS-232C terminal Computer To RS-232C terminal DIN-D-sub RS-232C adaptor RS-232C serial control cable (cross type, commercially available) Note · The RS-232C function may not operate if your computer terminal is not correctly set up. · See page 53 for connection of an RS-232C serial control cable. Info · Do not connect the RS-232C cable to a port other than the RS-232C terminal on the computer. · Do not connect or disconnect an RS-232C serial control cable to or from the computer while it is on. This may damage your computer. Connecting the Power Cord Plug the supplied power cord into the AC socket on the rear of the projector. Supplied accessory Power cord AC socket 26 Turning the Projector On/Off Info Turning the Projector on Note that the connections to external equipment and power outlet should be done before performing the operations written below. (See pages 23 to 26. ) Remove the lens cap and press S STANDBY/ON on the projector or fON on the remote control. · When System Lock is set, the keycode input box appears. The function for correcting trapezoidal distortion is called Keystone Correction. Note · The Keystone Correction can be adjusted up to an angle of approximately ±13 degrees and the screen can also be set up to an angle of approximately ±13 degrees (when the resize mode is set to "NORMAL" (see page 32)). Adjustment buttons (P/R/O/Q) RETURN button 1 Press g KEYSTONE to enter the Keystone Correction mode. · You can also display the on-screen display of the Keystone Correction mode with d KEYSTONE on the projector. R On-screen display (Keystone Correction mode) Keystone ADJ. 0 END 2 Press P/Q or O/R to adjust the Keystone Correction. · You can also adjust the Keystone Correction using the adjustment buttons on the projector. Shrinks upper side. (Move the slide bar in the + direction. ) Basic Operation Note · Press l RETURN while the on-screen display of the Keystone Correction mode is on the screen to return to the default setting. Shrinks lower side. (Move the slide bar in the - direction. ) 3 Press g KEYSTONE. · The on-screen display of the Keystone Correction mode will disappear. · You can also use d KEYSTONE on the projector. Info · While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. About the Auto Keystone Correction · The projector automatically detects tilt and the AUTO KEYSTONE feature automatically corrects trapezoidal distortion. Note · Automatic Keystone Correction may not work well in some cases, such as when the screen is leaning, temperature is extremely high or low, or zoom is at maximum or minimum. In these cases, fine adjust the Keystone Correction following steps 1 to 3. · You can select "On" or "Off" for the Auto Keystone Correction mode. (See page 41. ) 31 Image Projection (Continued) Resize Mode This function allows you to modify or customize the resize mode to enhance the input image. Depending on the input signal, you can choose "NORMAL", "BORDER" or "STRETCH" image. Press HRESIZE. · See page 41 for setting on menu screen. RESIZE button Computer NORMAL SVGA (800 K 600) XGA (1024 K 768) SXGA (1280 K 960) SXGA L (1400 K 1050) SXGA (1280 K 1024) 1280 K 720 1024 K 768 BORDER 768 K 576 STRETCH 1024 K 576 4:3 aspect ratio Other aspect ratios 1024 K 768 J 768 K 576 J 1024 K 576 1024 K 576 Input Signal Computer Image type NORMAL Output screen image BORDER STRETCH Resolution lower than XGA XGA 4:3 aspect ratio Resolution higher than XGA SXGA (1280K1024) 5:4 aspect ratio 1280K720 16:9 aspect ratio * Mode for projecting an image with the original aspect ratio without cutting any portions. : Cutout area on which images cannot be projected. 32 VIDEO · "STRETCH" is fixed when 540P, 720P or 1080I signals are entered. Input Signal DVD / Video Image type NORMAL Output screen image BORDER STRETCH 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM Letter box Squeezed 16:9 image Squeezed 4:3 image Basic Operation 16:9 aspect ratio 540P, 720P, 1080I 16:9 aspect ratio (4:3 aspect ratio in 16:9 screen) * Mode for projecting an image with the original aspect ratio without cutting any portions. : Area on which the image is not included in the original signals. 33 Operating with the Remote Control Adjustment buttons (P/R/O/Q) BREAK TIMER button FREEZE button Auto Sync (Auto Sync Adjustment) Auto Sync function works when detecting input signal after the projector turns on. Press FAUTO SYNC to manually adjust with Auto Sync function. Note PICTURE MODE button AUTO SYNC button · When the optimum image cannot be achieved with Auto Sync adjustment, use the help menu for manual adjustments. [. . . ] (852) 2410-2623 dcmktg@srh. global. sharp. co. jp http://www. sharp. com. hk Sharp Corporation (Taiwan) 0800-025111 http://www. sharp-scot. com. tw Sharp-Roxy Sales & Service Co. (60) 3-5125678 Sharp Middle East Fze 971-4-81-5311 helpdesk@smef. global. sharp. co. jp Sharp Thebnakorn Co. 02-236-0170 svc@stcl. global. sharp. co. jp http://www. sharp-th. com Sharp Electronics Incorporated of Korea (82) 2-3660-2002 lcd@sharp-korea. co. kr http://www. sharpkorea. co. kr Sharp Business Systems (India) Limited (91) 11- 6431313 service@sharp-oa. com Canada Singapore Hong Kong U. K. Taiwan Italy Malaysia U. A. E. France Spain Thailand Switzerland Korea Sweden India Appendix Austria 61 Specifications Product type Projector Model XG-560W Video system NTSC3. 58/NTSC4. 43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/ DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50 Display method Single Chip Digital Micromirror DeviceTM (DMDTM) by Texas Instruments DMD panel Panel size: 0. 55" (14 mm), 1chip XGA DMD No. of dots: 786, 432 dots (1, 024 [H] × 768 [V]) Lens 1­1. 15 × zoom lens, F2. 4­2. 6, f = 18. 7­21. 5 mm Projection lamp 300 W DC lamp Component input signal 15-pin mini D-sub connector (INPUT1/2) Y: 1. 0 Vp-p, sync negative, 75 terminated PB: 0. 7 Vp-p, 75 terminated PR: 0. 7 Vp-p, 75 terminated Horizontal resolution 600 TV lines (DTV720P) Computer RGB input 15-pin mini D-sub connector (INPUT 1/2)/output RGB separate/sync on green type analog input: 0­0. 7 Vp-p, positive, 75 terminated (OUTPUT) signal HORIZONTAL SYNC. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP XG-560W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP XG-560W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.