User manual SHARP XE-A507

[. . . ] Before you set up the cash register, prepare three new "AA" batteries which are necessary for memory backup. Find a stable and flat surface not subject to direct radiation, to place the cash register. English 1 Initializing the Cash Register 3 Installing the Paper To ensure the cash register operates properly, please use the following procedure: 1. [. . . ] Make sure the power cable is unplugged and batteries are not installed on the register. Insert the manager (MA) key into the mode switch and turn it to the REG position. REG OPX/Z OFF MGR X1/Z1 X2/Z2 (for receipt printing) 4 Basic Programming Set the mode switch to the PGM position. REG OPX/Z OFF VOID PGM MGR X1/Z1 X2/Z2 5 Now, you are ready! Before Starting Entries · Set the mode switch to the REG position. REG OPX/Z OFF VOID PGM MGR X1/Z1 X2/Z2 1. Make sure the print head release lever is positioned as illustrated below. Print head release lever Setting the Date Enter the date in 8 digits using the month-day-year format. IMPORTANT: This operation must be performed without batteries installed. The register display will show "0. 00" with " ". 2 Installing the Batteries 1. (Batteries are not supplied with the cash register. ) Make sure that positive (+) and negative (-) poles of each battery are properly oriented. 4. Specify a tax rate (%) for calculation of tax on each taxable subtotal using the following sequence: 4. Insert the end of the paper into the printer until it is caught by the printer auto-feed and comes out the top of the printer. If the printer does not catch the paper, feed the paper while pressing F. s 9 @ Tax number (1 to 4)* @ R@QsA where R: Tax rate (0. 0000% to 100. 0000%) Q: Minimum taxable amount (0. 01 to 999. 99) (Smallest amount for which tax must be collected. ) *Up to 4 types of tax are programmable. Cut off the excess paper using the edge of the inner cover, and replace the printer cover. taxable s A 12 Tax 1 Tax rate (6. 25%) amount ($0. 12) Key operation Clerk code 1L Price and dept. 18 s 2:0 A Amount tendered Other Programming While the cash register is pre-programmed so it can be used with minimal set-up, it does provide you optional features. [. . . ] 18 s 2:0 A Amount tendered Other Programming While the cash register is pre-programmed so it can be used with minimal set-up, it does provide you optional features. For details, please refer to the instruction manual. When an error occurs: NOTE: If you want to use a paper roll for journal printing, please refer to GETTING STARTED section of the instruction manual. [. . . ]