User manual SHARP SF-9400

[. . . ] Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier Service Department Number SF-9400 CONTENTS INTRODUCTION The SF-9400 has been designed to give high productivity while offering convenient copying features. Its main features are: q Easy operation, q Automatic exposure control, q PHOTO mode copying, q Convenient functions such as DUAL PAGE COPYING, EDGE ERASE, MARGIN SHIFT, and q Power savings with preheat and auto power shut-off modes. The machine can be equipped with an optional automatic document feeder (ADF) or reversing automatic document feeder (RADF) for automatic feeding of original documents and an optional sorter or staple sorter to provide finished copy sets ready for distribution. To ensure optimum use of copier functions, please familiarize yourself with this manual and the copier. [. . . ] " ­­" will appear again in the copy ratio display. q To continue with other auditing programs, enter the appropriate program code number. ( Setting for auditing accounts Setting for auditing programs varies with the program number. For setting of all programs, first follow steps 1 and 2 in "Auditing code number" on page 37. (Press the clear ( C ) key, the INTERRUPT key, and the clear key again. Enter the auditor code number using the 10-key pad. ) Then enter the program number using the 10-key pad and press the START key. Follow the appropriate instructions for the program. 38 AUDITING PROGRAMS Program No. 10: Auditing mode If the auditing mode is enabled, copying is limited to operators with an assigned 3-digit account number. 10 is entered, the current setting (0: OFF, 1:ON) will blink on the right side of the copy quantity display. 1. Select the desired setting using the 10-key pad. 1 4 7 0 2 5 8 C 3 6 9 POWER SAVE START 0: 1: OFF ON 2. To continue with other auditing programs, enter the desired program number. 11 is entered, "­­" will appear in the copy quantity display. Use a ZOOM ( number. ZOOM , ) key to select the account 100% 4 7 0 5 8 C 6 9 2. Press and hold the 0 key. q The number of copies made against the specified account number will be displayed. The number will appear in three steps, each with two digits (the first digit is "­ ") while the 0 key is pressed. w w w Example: 1, 234 copies q The upper limit for the number of copies is 49, 999. If the number of copies made reaches 50, 000, the number will be reset to 0 and counting will start again from 0. 3. To continue with other auditing programs, press the INTERRUPT key and then enter the desired program number. To exit the auditing program mode, press the key. GENERAL INFORMATION Auditing programs 41 AUDITING PROGRAMS Program No. 15 is used to reset all accounts or to reset any desired individual accounts. 15 is entered, "0" will blink on the right side of the copy quantity display. 1 4 7 0 2 5 8 C 3 6 POWER SAVE START 1. Press the START key. 9 q If you have pressed key 0 in step 1, an account number will appear in the copy quantity display. If you have pressed key 1, the number of copies against all account numbers will be reset. Press the START key. q ) key to select the account ZOOM START The number of copies against the specified account number will be reset. 100% 5. [. . . ] 11" x 17" 5-1/2" x 8-1/2" 10-bin staple sorter (SF-S54N) 20-bin staple sorter (SF-S56) Paper size Power supply Weight Dimensions OPTIONAL EQUIPMENT Drawn from the copier Approx. (26 kg) (including mounted fittings) 17-3/32" (W) x 23-25/64" (D) x 24-37/64" (H) (434 mm (W) x 594 mm (D) x 624 mm (H)) Specifications are subject to change for improvement without notice. 81 STAND/500-SHEET PAPER DRAWER (SF-D20) STAND/1000-SHEET PAPER DRAWER (SF-D21) These optional stands with paper trays provide the convenience of increased paper capacity for the copier and make a choice of paper sizes readily available for copying. Even greater paper capacity and size flexibility are available when the stands are equipped with an optional auxiliary 500-sheet paper drawer (SF-CM11). The SF-D20 is available with a 500-sheet paper drawer alone or with an optional auxiliary 500-sheet paper drawer for the additional flexibility of two feeds with a total capacity of 1, 000 sheets. [. . . ]