User manual SHARP RK-93S27 INSTALLATION GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP RK-93S27. We hope that this SHARP RK-93S27 user guide will be useful to you.


SHARP RK-93S27 INSTALLATION GUIDE: Download the complete user guide (2612 Ko)

Manual abstract: user guide SHARP RK-93S27INSTALLATION GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] INSTALLATION INSTRUCTIONS BUILT-IN KIT MODELS RK-93S27 RK-93S30 IMPORTANT: This Built-In Kit is designed for use with those Sharp Microwave Ovens specifying RK-93S27 or RK-93S30 Built-In Kit on rating label on the front of the oven. PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION! PART NAME DUCT (A)-1 PDUC-0259WRW0 DUCT (A)-2 RK-93S27 PDUC-A330WRW0 RK-93S30 PDUC-A733WRW0 DUCT (A)-3 PDUC-A734WRW0 DUCT (B) PDUC-0260WRW0 DUCT (C) PDUC-A274WRW0 STOPPER RK-93S27 LSTPFA005WRW0 RK-93S30 LSTPFA008WRW0 CORD BOX FCOVHA010WRK0 SASH (T) RK-93S27 GWAKMA031WRE0 RK-93S30 GWAKMA033WRE0 SASH (S) RK-93S27 GWAKMA030WRE0 RK-93S30 GWAKMA032WRE0 CUSHION (A) PCUSU0322WRP0 CUSHION (B) PCUSUA531WRP0 SCREW (A) XCTSD40P08000 (one extra) SCREW (B) XMMSE41P20000 Q'TY 1 1 1 1 1 2 1 2 2 1 1 10 4 DUCT (A)-1 DUCT (A)-2 DUCT (A)-3 DUCT (B) (FOR RK-93S30) (FOR RK-93S27) DUCT (C) CORD BOX STOPPER SASH (T) CUSHION (B) (thick) CUSHION (A) (thin) SASH (S) SCREW (A) SCREW (B) * For walls other than wood, you may need appropriate screws to install the SASH and STOPPER. [. . . ] ELECTRICAL SUPPLY At the rear of the opening, provide a 3 pronged, polarized, electrical outlet, 115-120 volt A. C. , 15 amp. OVEN SUPPORTS 5 Cement two 2" x 2" x 15  /8" wooden supports as indicated in Sketch 1. Follow contact cement instructions carefully. 1 STEP 2: INSTALLATION OF KIT (a) Insert the edge of DUCT (B) into the hold lip of DUCT (C). Remove the existing screw (#1) at upper right rear of the oven and secure DUCT (C) with the screw (#1) just removed from the oven. Secure DUCT (B) with SCREW (A) through the duct and into the original screw hole in the oven. See Sketch 2. 2 2 (b) Position DUCT (A)-1 on the top of the oven inserting edge of DUCT (BC) into hold lip of DUCT (A)-1. See Sketch 3. 3 (c) Position DUCT (A)-2 on top of the oven and insert it into the hold lip of DUCT (A)-1. See Sketch 4. 4 (d) Position DUCT (A)-3 on top of the oven and insert it into DUCT (A)-2. See Sketch 5. CUSHION (A) 5 3 STEP 3: CORD BOX (a) Plug the oven electrical cord into the CORD BOX RECEPTACLE and roll the remaining part of the cord into the CORD BOX as shown in Sketch 6-(a). Using the screw #2 just removed from the oven, secure the CORD BOX to the oven. See Sketch 6. 6 STEP 4: INSTALLATION (a) Place the oven with the right side on a flat surface. See Sketch 7. BOTTOM PLATE SCREWS 7 CUSHION (B) (b) Return the oven to the original position. [. . . ] Secure the lower SASH (T) to the wall (or cabinet) through the lower hole in SASH (S) using a SCREW (B) provided. See Sketch 0. ! 6 SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 Phone: 1-800-BE-SHARP (237-4277) TINSEB348WRRZ 8 [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP RK-93S27




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP RK-93S27 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.