User manual SHARP QT-222W

[. . . ] G If the unit does not work properly, set the FUNCTION switch to STAND-BY and then to ON again. G This unit should only be used within the range of 5°C - 35°C (41°F - 95°F). [. . . ] G Installing the batteries incorrectly may cause the unit to malfunction. Replace the battery compartment cover. 3 Battery replacement: Replace the batteries when they become weak and/or recording or playback is impaired. G Remove the batteries if they are weak or if the unit will not be used for long periods of time. Caution: Do not use rechargeable batteries (nickel-cadmium battery, etc. ). Listening to the Radio STAND-BY 1 2 3 4 Set the FUNCTION switch to RADIO. Turn the VOLUME control to increase or decrease the volume. Aerial adjustment: FM MW SW1 and SW2 After use: Set the FUNCTION switch to STAND-BY. E-3 QT-222W(B)_E. pm 10 03. 10. 24, 11:55 AM QT-222W(B) 92L20101550040 Listening to a Cassette Tape STAND-BY 1 2 3 4 5 Set the FUNCTION switch to TAPE. Load a cassette into the cassette compartment with the side to be played facing you. Press the PLAY 1 button. I Cassette tape To advance the tape, press the STOP/ EJECT I 7 button, then press the F FWD 3 button. To rewind, press the STOP/EJECT I 7 button, then press the REWIND 2 button. Precautions: G Be sure not to press the PLAY 1 and REWIND 2 buttons simultaneously, or the tape will become damaged. G Before changing from one tape operation to another, press the STOP/EJECT I 7 button. G Do not press the PAUSE 6 button whilst the fast forward or rewind operations are in progress. The F FWD 3 or REWIND 2 button will not be released when the tape end is reached. Once this occurs, press the STOP/EJECT I 7 button. G For playback, use normal or low-noise tapes for the best sound. (Metal or CrO2 tapes are not recommended. ) For recording, use only normal tapes. [. . . ] To stop recording: Press the STOP/EJECT I 7 button. E-5 QT-222W(B)_E. pm 12 03. 10. 24, 11:55 AM QT-222W(B) 92L20101550040 Maintenance I Cleaning the tape-handling I Cleaning the cabinet Periodically wipe the cabinet with a soft cloth parts G Dirty heads, capstan or pinch roller can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. [. . . ]