User manual SHARP PN-L602B

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. 1 E IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. ONLY CAUTION: Use the supplied power cord as it is. NOTE: This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. [. . . ] Press TIPS MENU , press , make settings and then twice to close the menu screen. · The menu will differ depending on the input mode. · The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING and SCHEDULE screens will close in about 4 minutes. ) 17 E Menu Items Menu item details The menu will differ depending on the input mode. COLOR MODE Changes the color mode on the screen. The color mode on the screen can also be changed using a remote control unit. Used for adjusting R-CONTRAST, G-CONTRAST, and B-CONTRAST respectively. PRESET Selects the color temperature when the WHITE BALANCE is set to PRESET. R-CONTRAST Adjusts red component when the WHITE BALANCE is set to USER. G-CONTRAST Adjusts green component when the WHITE BALANCE is set to USER. B-CONTRAST Adjusts blue component when the WHITE BALANCE is set to USER. RESET Resets the values of the PICTURE menu items to the factory preset values. MENU Select "ON" and then press . SCREEN (PC2/PC3) AUTO The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. DVI SELECT Selects equipment that is to be connected to the PC1/AV1 input terminal. BNC SELECT Selects equipment that is to be connected to the PC3/AV2 input terminals. QUICK SHOOT PATTERN 3 PATTERN 4 Reduces the visual lag inherent in fast-motion scenes. COLOR SYSTEM Select the color system of the AV equipment which is connected to AV3 input terminal. (AUTO / PAL / PAL-60 / SECAM / NTSC3. 58 / NTSC4. 43) When AUTO is selected, the color system is automatically set according to the input signal. AUDIO OUTPUT Sets the volume of sound output from the PC/AV audio output terminals. 480LINES (PC2/PC3) If a computer connected to the PC2/PC3 input terminal has a resolution of 640 x 480 or 848 x 480, make a selection according to the resolution. 768LINES (PC2/PC3) If a computer connected to the PC2/PC3 input terminal has a resolution of 1024 x 768, 1280 x 768 or 1360 x 768, make a selection according to the resolution. SELF ADJUST On a PC2/PC3 screen with a resolution of 800 x 600 or higher, specify whether to perform screen adjustment automatically or not. When ON is selected, the screen is automatically adjusted when the timing of input signals varies. POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal standby mode when the PC screen is displayed. [. . . ] · Internal temperature rises quickly if dust accumulates inside the monitor or around the vents. Ask Sharp dealer about removing internal dust. E 32 Specifications Product Specifications PN-L602B 52" wide (132. 2 cm diagonal) ASV low-reflection black TFT LCD 1920 x 1080 16. 77 M colors (8 bits/color) 0. 600 mm (H) x 0. 600 mm (V) 176° right/left/up/down (contrast ratio 10) 45-3/8 x 25-1/2 (1152. 0 x 648. 0) Digital (DVI 1. 0 standard-compliant), Analog RGB (0. 7Vp-p) [75 ] Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, Composite sync (TTL: positive/negative) Video color system PAL, PAL-60, SECAM, NTSC (3. 58 MHz), NTSC (4. 43 MHz) Plug and play VESA DDC2B Power management VESA DPMS, DVI DMPM Input terminals PC/AV Digital DVI-D 24 pin (HDCP compatible) x 1 PC Analog Mini D-sub 15 pin, 3 rows x 1, BNC *1*2 x 1 Audio 3. 5 mm mini stereo jack x 1 AV Composite video BNC x 1 Component BNC (Y, Cb/Pb, Cr/Pr)*1 x 1 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Output terminals PC/AV Digital DVI-D 24 pin x 1 *3 Audio RCA pin (L/R) x 1 Serial (RS-232C) D-sub 9 pin x 1 Speaker 7 W + 7 W [6 ] Power requirement AC 120 V, 60 Hz Operating temperature 32°F to 104°F (0°C to 40°C) Operating humidity 20% to 80% (no condensation) Power consumption 325 W (Input signal waiting mode: 11. 5 W*4, Standby mode: 3. 5 W) Dimensions inch (mm) Approx. 49-3/8 x 5-7/8 x 29-3/16 (1, 254 x 149 x 742) (excluding protrusions) Weight lbs. 97. 0 (44) (excluding the temporary stand) *1 *2 *3 *4 Cannot be used simultaneously. [. . . ]