User manual SHARP PN-G655U

[. . . ] IMPORTANT: To aid reporting in case of loss or theft, please record the product's model and serial numbers in the space provided. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: The AC outlet shall be installed near the equipment and shall be easily accessible. WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly Approved by the manufacturer could void the user's authority to operate this equipment. [. . . ] * If you do not press any buttons for about 4 seconds, the VOLUME menu automatically disappears. Even when the screen size is changed, the display may remain the same depending on the input signal. pC input AV input ZOOM 1 PC input AV input ZOOM 2 PC input AV input NORMAL PC input AV input DotbyDot PC input AV input *: Displays image so it fills the screen without changing the aspect ratio of the input signals. Displays the entire image of the aspect ratio of 4:3 without changing the aspect ratio. An image with a 4:3 aspect ratio is stretched to fill the entire screen. An image with a 4:3 aspect ratio is enlarged to fill the entire screen without changing the aspect ratio. With a monitor with a screen resolution of 1600 x 1200, selecting DotbyDot displays the NORMAL screen. Using this monitor's screen-size switching or dual-screen display functions to compress or expand the screen for commercial or public viewing in establishments like cafes or hotels may infringe on the rights of the creators, as protected by Copyright Law, so please be careful. When "Enlarge" is set, the screen size is fixed to "WIDE" mode. When dual-screen display is selected, the screen size cannot be changed. The appearance of the original video may change if you select a screen size with a different aspect ratio than the original image (e. When an ordinary non-wide image (4:3) is viewed with the whole screen using the screen-size switching function of this monitor, the edge of the image may be lost or appear distorted. If you wish to respect the creator's intentions, set the screen size to "NORMAL". When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen size using the screen-size switching function of this monitor. With some software, there may be noise or distortion at the edges of the screen. This is due to the characteristics of the software, and is not a malfunction. Depending on the original image size, black bands may remain at the edges of the screen. Name of the menu Input mode An item being selected (highlighted) Screen resolution of input signal, and other data. The menu screen will close automatically if no operation is performed for about 15 seconds. (DATE/TIME SETTING and SCHEDULE screens will close in about 4 minutes. The color mode on the screen can also be changed using a remote control unit. [. . . ] Some kind of load noises from outside might interfere with normal operation. Turn off the power and turn it on after waiting at least 5 seconds, and then check the operation. When the internal temperature of the monitor rises excessively, the brightness of the backlight decreases in order to prevent high-temperature-related problems. This happens when the cabinet slightly expands and contracts according to change in temperature. [. . . ]