User manual SHARP PC-GP1415 SETUP GUIDE

[. . . ] If any of these items is missing or damaged, notify your dealer immediately. Be sure to save the shipping materials and carton in case you need to ship or store the computer in the future. [. . . ] Be sure to save the shipping materials and carton in case you need to ship or store the computer in the future. Always use the included LAN cable to insure compliance with requirements of EMC regulations for computing equipment. (European users) Attach the included core to your LAN cable to insure compliance with requirements of EMC regulations for computing equipment. (Except European users) Some brochures or supplements may be contained other than the above. 2. Install the battery pack into the computer. 1. Slide the battery stopper on the battery pack to the unlocked position( ). Battery Stopper 3. Connect the computer to AC power. 1. Plug the AC adapter cable to the AC adapter jack on the left side of your computer. Plug the AC power cord into a wall outlet. AC Adapter Jack AC Adapter To Wall Outlet 3. Insert the battery pack into the computer by matching the notched parts of the battery to the projected parts on the computer. AC Power Cord · Always use the AC adapter included with the computer or the optional one (may not be available in some countries). · Always hold the AC power cord by its plug when removing it from the wall outlet. Select an Operating System. This product has a dual-install of both Windows(R) XP Professional and Windows(R) 2000 Professional. You are required to observe the following: (1) You must make a one-time selection between Windows(R) XP Professional and Windows(R) 2000 Professional. (2) After such selection has been made, if the rejected product is then desired, you will need to acquire and pay for such product as a separate transaction. 12. Double-click the time appearing on the bottomright of the screen to open Date/Time Properties (Windows 2000) or Date and Time Properties (Windows XP Professional) dialog box. Confirm Time Zone is correctly selected, and set date and time. 2. Confirm the selection, the system start installing Windows. Follow the instruction on the screen. Now your PC-UM series personal computer is ready! [. . . ] Double-click the time appearing on the bottomright of the screen to open Date/Time Properties (Windows 2000) or Date and Time Properties (Windows XP Professional) dialog box. Confirm Time Zone is correctly selected, and set date and time. 2. Confirm the selection, the system start installing Windows. [. . . ]