User manual SHARP ND-216U2 DATASHEET

[. . . ] Read more about the remote control in Use your TV > Controls > Remote control (Page 11). Press to select the next TV tour. For the best picture and sound quality, connect a DVD, Blu-ray disc player, or game console through HDMI (TM). Note: If you are prompted to select the TV connection, select the connector that this device uses. See Connect your TV > Connect devices (Page 37) for information on connection. [. . . ] The TV switches to standby after the specified time. Set locks and timers Clock You can display a clock on the TV screen. The clock displays the time that is broadcast by your TV service operator. The clock is displayed on the lower right hand corner of the TV screen. Change the clock mode The clock mode is automatically synchronised to the Coordinated Universal Time (UTC). If your TV cannot receive UTC transmissions, change the clock mode to [Manual]. Enable or disable daylight saving If clock mode is set to [Country dependent], you can enable or disable daylight saving for your time zone. In the [Clock] menu, select [Daylight saving] > [Daylight saving time] or [Standard time], then press OK. Daylight saving is enabled or disabled. Child lock To protect children from unsuitable TV programmes, you can lock the TV or block age rated programmes. Tip: If you forget your code, enter '8888' to override any existing codes. Select channels to lock or unlock. EN 24 Parental rating Some digital broadcasters rate their programmes according to age. You can set your TV to display only programmes with age ratings lower than your child's age. Select [Universal access] > [On], then press OK. Hearing impaired Tip: To verify whether a hearing impaired audio language is available, press OPTIONS and select [Audio language]. Press one of the following buttons to select an option: Red: Switch hearing impaired on or off. Press to exit. EN 26 Use Link operation What you can do Get the most out of your HDMI-CECcompliant devices with SHARP Link operation. Some examples are Philips EasyLink, Anynet (Samsung) or BRAVIA Sync (Sony). After you switch on SHARP Link operation, these features are available: One-touch play When you play an HDMI-CEC compliant device, the TV switches on from standby, and switches to the correct source. One-touch standby When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode. System audio control If you connect an HDMI-CEC compliant device that includes speakers, you can choose to hear the TV from those speakers instead of the TV speakers. For more information about TV audio output, see Use more of your TV > Use Link operation > Select speaker output (Page 28). Link operation remote control You can control multiple HDMI-CEC compliant devices with your TV remote control. To switch on Link operation remote control, see Use more of your TV > Use Link operation > Control devices simultaneously (Page 28). Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, switch on Brilliant colour processor +. [. . . ] The TV did not save your picture settings: Make sure that the TV location is set to Home. The picture does not fit the screen; it is too big or too small: Try a different picture format. The picture position is incorrect: Picture signals from some devices may not fit the screen correctly. The picture from broadcasts is scrambled: You may need a Conditional Access Module to access content. [. . . ]