User manual SHARP MX-PEX2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP MX-PEX2. We hope that this SHARP MX-PEX2 user guide will be useful to you.
Manual abstract: user guide SHARP MX-PEX2
Detailed instructions for use are in the User's Guide.
[. . . ] SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws.
Trademark Acknowledgments
Microsoft Windows operating system is a registered trademark or trademark of the Microsoft Corporation in the U. S. A. [. . . ] For the information on Fiery Web Tools, see the manual on the CD-ROM that accompanies the Fiery Printer Controller.
2
SYSTEM SETTINGS
When the Fiery Print Controller is installed, the "Printer Condition Settings" do not appear in the system settings. The [Fiery Settings] key and [Remote Auto Color Calibration Mode] key are added to the "Printer Settings", and restrictions apply to the previous settings. [MX-5500N/6200N/7000N] Touch the [Fiery] icon in the system bar and enter the administrator password, then touch the [OK] key. (The display method differs from the previous "Printer Settings". )
Administrator Password
Cancel
OK
Printer Settings(Fiery)
OK
Enter the administrator password. (From 5 to 32 characters)
Password
***** Fiery Settings Remote Auto Color Calibration Mode
(2)
[MX-3500/4500 series]
System Settings Printer Settings Default Settings Interface Settings Fiery Settings
(1)
(3)
OK 1/2
System Settings Printer Settings Remote Auto Color Calibration Mode
OK 2/2
NOTE
The additions and changes to the system settings explained in this manual also apply to the Web pages of the machine.
3
Fiery Settings
When the [Fiery Settings] key is touched, the following screen will appear. This screen allows various settings to be selected when printing using the Fiery Print Controller.
Fiery Settings
Back
Continue to Setup?Yes
OK Run Setup
After selecting or changing Fiery settings, touch the [Back] key (MX-3500/4500 series: ) to return to the printer settings screen. For detailed information on the settings, see the manual on the CD-ROM that accompanies the Fiery Print Controller. NOTE
When the Fiery Print Controller* is installed, configure the IP address and other network settings in the "Fiery Settings". * After changing the IP address in the "Fiery Settings", restart the machine. When the Fiery settings screen is displayed in the operation panel, the mode select keys, Start keys ([COLOR START] key ( ) / [BLACK & WHITE START] key ( )), [LOGOUT] key ( ), [PROGRAM] key ( ), and [HOME] key (MX-5500N/6200N/7000N) are disabled. To return to the screen that appeared before the system settings were accessed, press the [CLEAR ALL] key ( ).
Remote Auto Color Calibration Mode
To use remote auto color calibration, place the color calibration pattern that was printed using EFI's Color Wise Pro on the document glass, touch the [Remote Auto Color Calibration Mode] key to ready the machine for scanning, and then execute scanning from your computer. During scanning of the pattern, the message "This machine is in the remote auto color calibration mode. When scanning is finished, touch the [Exit] key to quit remote auto color calibration mode. For information on the advanced settings for remote auto color calibration, see the manual on the CD-ROM that accompanies the Fiery Print Controller.
Regular Printer Color Calibration Function
When the Fiery Print Controller is installed, the [Auto Color Calibration] ([Color Adjustments]) key does not appear and the printer color calibration function cannot be used. [. . . ] The security settings menu appears when the [Security Settings] key is touched in the system settings (administrator).
Disabling of Print Jobs Other than Print Hold Job
When the Fiery Print Controller is installed, the "Disabling of Print Jobs Other than Print Hold Job" checkbox does not appear in the security settings menu.
Scan to HDD Image Send Disabling of List Print: All Custom Setting List Sending Address List Document Filing Folder List Disabling of Print Jobs Other Than Print Hold Job
System Settings Security Settings Disabling of Document Filing Disabling of List Print (User) Disabling of Print Jobs Other than Print Hold Job
OK 4/5
MX-5500N/6200N/7000N
MX-3500/4500 series
Disabling of Document Filing
Because the regular document filing function cannot be used when a printer driver for the Fiery Print Controller is used, settings related to printing in the "Disabling of Document Filing" do not appear.
Copy Printer Scan to HDD Image Send Disabling of List Print: All Custom Setting List Sending Address List
System Settings Disabling of Document Filing Quick File Mode Copy Printer Scan to HDD
OK Sharing Mode Confidential Mode 1/2
MX-5500N/6200N/7000N
MX-3500/4500 series
Document Control Setting
Because the document control function cannot be used when a printer driver for the Fiery Print Controller is used, the two items below of "Document Control Setting" will not appear. · "Document Control Print Select" > "Allow User to Select"
Document Control Setting Printer: Document Control Print Select: Print Pattern Setting: Print Color Setting: Cancel OK
System Settings Document Control Print Select(Printer)
OK
Always Print Not Printing Always Print Allow User to Select Allow User to Select the Print Color
Not Printing Allow User to Select
Always Print
Prints(Document Filing): Document Control Print Select:
Always Print
MX-5500N/6200N/7000N
MX-3500/4500 series
9
· "Print Color Setting" > "Allow User to Select the Print Color"
Document Control Setting Printer: Document Control Print Select: Print Pattern Setting: Print Color Setting: Cancel OK
System Settings Print Color Setting (Printer)
OK
Always Print Pattern 1 Bk(Black) Allow User to Select the Print Color
Bk(Black)
C(Cyan)
Y(Yellow)
Prints(Document Filing): Document Control Print Select:
Allow User to Select the Print Color
Always Print
MX-5500N/6200N/7000N
MX-3500/4500 series
Printing a document control pattern
The "Document Control Print Select" (Printer) screen is used to select whether or not a document control pattern is printed on Fiery print jobs. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP MX-PEX2
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP MX-PEX2 will begin.