User manual SHARP MX-M3100N

[. . . ] If your copier is so marked, please read "I" for "ON" and " " for "OFF". The socket-outlet shall be installed near the equipment and shall be easily accessible. Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations. Trademark acknowledgments The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. Microsoft, Windows, Windows 98, Windows Me, Windows NT 4. 0, Windows 2000, Windows XP, Windows Server 2003 and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the U. S. A. Macintosh, Mac OS, AppleTalk, EtherTalk, LaserWriter, and Safari are registered trademarks or trademarks of Apple Computer, Inc. [. . . ] 4. B5 B4 A3 A4 PAMPHLET COPY JOB BUILD 1 2 3 4 5 6 Margin shift (page 5-3) Erase (page 5-4) Dual page copy (page 5-5) Pamphlet copy (page 5-6) Job build (page 5-8) Tandem copy (page 5-10) 7 [OK] key on the special modes screen Touch the [OK] key to return to the main screen of copy mode. 8 / key Touch these keys to change the special modes screen. There are three special modes screens. The following special functions can be selected in the 2nd screen (2/3). Covers/inserts (page 5-12) Book copy (page 5-26) Transparency inserts (page 5-23) Tab copy (page 5-27) Multi shot (page 5-24) Card shot (page 5-29) The following special functions can be selected in the 3rd screen (3/3). Mirror image (page 5-31) B/W reverse (page 5-31) Print menu (page 5-32) General procedure for using special functions 1 Touch the [SPECIAL MODES] key. SPECIAL MODES 2-SIDED COPY OUTPUT To select a special function in one of the other two screens, use the / keys to change the screen. 2 Touch mode. SPECIAL MODES the key for the desired special Example: Selecting the shift function Setting procedures for modes requiring setting screens start on the next page. The dual page copy, job build, tandem copy, mirror image and B/W reverse functions do not require setting screens. margin MARGIN SHIFT ERASE PAMPHLET COPY JOB BUILD 5-2 SPECIAL MODES Margin shift The margin shift function will automatically shift the text or image on the copy paper approximately 10 mm (1/2") in its initial setting. This function is convenient when stapling or binding copies with a string. NOTE The initial setting for the margin width can be changed in the administrator settings to any value from 0 to 20 mm (0" to 1") (page 16 of the administrator settings guide). One-sided copying Image shifted Original to the right Image shifted to the left The shift direction can be selected from right or left shift as shown in the illustration. Margin Margin Two-sided copying Original Image shifted to the right Image shifted to the left Or Margin Margin 5 the 3 Set [OK]shift amount as needed and touch the key. OK CANCEL OK SIDE 2 20) To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. 1 Touch the [MARGIN SHIFT] key on the special modes screen. The margin shift setting screen will appear. The margin shift icon ( ) will also appear in the upper left of the screen to indicate that the function is turned on. SIDE 1 10 (0 mm 10 (0 mm 1) SPECIAL MODES Use the and the keys to set the shift amount. The shift amount can be set from 0 to 20 mm in 1 mm (0" to 1" in 1/8") increments. MARGIN SHIFT ERASE PAMPHLET COPY JOB BUILD 4 Touch the [OK] key on the special modes screen. You will return to the main screen of copy mode. About the steps that follow If an automatic document feeder is being used, see pages 4-7 through 4-10. Blank pages may be automatically produced at the end depending on the number of the originals. If a saddle stitch finisher is installed, copies can be stapled in two positions along the centre of copies and folded at the centre. Right binding First page To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. 3 Select the binding position (left binding or right binding). LEFT BINDING RIGHT BINDING C SE 1 Touch the [PAMPHLET COPY] key on the special modes screen. SPECIAL MODES MARGIN SHIFT ERASE PAMPHLET COPY JOB BUILD The PAMPHLET COPY setting screen will appear. The pamphlet copy icon ( , etc. ) will also appear in the upper left corner of the screen to indicate that the function is turned on. If you wish to insert a different type of paper for use as a cover, follow steps 4 through 12 below. If you do not wish to insert paper for a cover, continue from step 8 on the next page. type of originals 2 Designate the or 2-sided. copied: 1-sided ORIGINAL 1-SIDED 2-SIDED to be 4 Touch the [COVER SETTING] key. CANCEL OK Select the [2-SIDED] key if you wish to scan a twosided original using the automatic document feeding function. NG RIGHT BINDING COVER SETTING 5-6 SPECIAL MODES not you 5 Select whether oror "NO"). wish to copy on the cover ("YES" PRINT ON COVER YES NO the original in the document feeder 9 Place the document glass. (page 4-3) or on 10 Ensure that the desired paper size has been automatically selected based on the original size. To select another size paper, select the desired size and touch the [AUTO IMAGE] key. The appropriate copy ratio will be selected 100% automatically based on the original size and the paper size. (See steps 2 and 3 on page 4-15. ) AUTO A3 PAPER SELECT 6 Select the paper tray for the cover. CANCEL OK PAPER TRAY BYPASS TRAY A4 PLAIN The currently selected paper tray for the cover is displayed. 2 The size and type of paper in the currently selected tray is displayed. 1 as 11 Select any desired copy settings suchand the exposure or number of copies, then press the [START] key. In the example screen above, A4 (8-1/2" x 11") size plain paper is loaded. (In the screen example, the "BYPASS TRAY" display is the tray selection key. ) The tray selection screen appears when the tray selection key is touched. [. . . ] 2-20 Total number of originals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Touch panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13, 1-14, 7-4, 7-5 Transparency film . . . . . . . . . . . . . . 2-6, 2-12, 2-13, 4-20, 5-23 Transparency inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5, 5-2, 5-23 Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10, 3-2 Tray 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10, 2-2 to 2-4, 2-26 Tray 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10, 2-2 to 2-4, 2-26 Tray 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]