User manual SHARP MX-M160 PRINTER SCANNER

[. . . ] Should the fuse need to be replaced, a BSI or ASTA approved fuse to BS1362 marked or and of the same rating as the one removed from the plug must be used. Always refit the fuse cover after replacing the fuse on the moulded plug. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied either cut-off the moulded plug (if this type is fitted) or remove by undoing the screws if a rewireable plug is fitted and fit an appropriate type observing the wiring code below. DANGER: The fuse should be removed from the cut-off plug and the plug destroyed immediately and disposed of in a safe manner. [. . . ] 50 kg (110. 3 lbs. ) Overall dimensions when 1571 mm (W) x 771 mm (D) (61-13/64" (W) x 30-11/32" (D)) attached to machine * Can be installed on the MX-M850. Also requires the bypass tray (MX-MFX1). Bypass tray specifications Model Paper sizes Paper weight Paper capacity Paper types Dimensions Weight MX-MFX1 A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2"R, 8K, 16k, 16KR, (Includes automatic paper size detection function. Bond)) SHARP-recommended plain paper, recycled paper, coloured paper, heavy paper, thin paper, transparency film, tab paper, and label sheets 198. 8 mm (W) x 503. 5 mm (D) x 361. 2 mm (H) (7-53/64" (W) x 19-53/64" (D) x 14-7/32" (H)) Approx. 5. 1 kg (11. 3 lbs. ) Inserter specifications Model MX-CFX2* A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8K, 16k, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm (Includes automatic paper size detection function. Bond) (Both upper and lower trays) Supplied from the machine 540 mm (W) x 730 mm (D) x 1270 mm (H) (21-17/64" (W) x 28-47/64" (D) x 49-63/64" (H)) Approx. 45 kg (99. 3 lbs. ) Paper sizes Paper weight Paper capacity Power supply Dimensions Weight * Requires installation of the finisher (MX-FNX5). 13 SPECIFICATIONS Finisher specifications Model Paper sizes*1 MX-FNX5 A3W, A3, B4, A4W, A4, A4R, B5, B5R, A5, A5R, 12" x 18", 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8K, 16K, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm Top tray: 52 g/m2 to 205 g/m2 (16 lbs. Index) Non-staple, staple 500 sheets (A4, A4R, B5, B5R, A5, A5R, 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 16K, 16KR, 318 mm x 234 mm, 312 mm x 220 mm, 320 mm x 225 mm) 250 sheets (A3W, A3, B4, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 7-1/4" x 10-1/2"R, 8K, 318 mm x 469 mm, 312 mm x 440 mm, 320 mm x 450 mm) Folded paper 30 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R) Stapling: 200 sets or 3000 sheets (A4, A4R, B5, B5R, 8-1/2" x 11", 8-1/2" x 11"R, 16K, 16KR) 150 sets or 1500 sheets (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 7-1/4" x 10-1/2"R, 8K) Paper weight Modes Top tray Tray capacity*2 Non-stapling: 3000 sheets (A4, B5, 8-1/2" x 11") 1500 sheets (A3, B4, A4W, A4R, B5R, 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 318 mm x 234 mm, 312 mm x 220 mm, 320 mm x 225 mm) Offset tray*3 1000 sheets (A3W, 12" x 18", 318 mm x 469 mm, 312 mm x 440 mm, 320 mm x 450 mm) 500 sheets (A5, 5-1/2" x 8-1/2") 100 sheets (A5R, 5-1/2" x 8-1/2"R) Folded paper 30 sheets (A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R) Supplied from the machine Power supply Dimensions Weight 800 mm (W) x 730 mm (D) x 980 mm (H) (31-31/64" (W) x 28-47/64" (D) x 38-37/64" (H)) (When output tray is stored) Approx. 72. 8 kg (160. 5 lbs. ) Overall dimensions when 2101 mm (W) x 771 mm (D) (82-11/16" (W) x 30-11/32" (D)) attached to machine Stapler section Allowed paper sizes for stapling Paper weight for stapling Maximum number of sheets for stapling*3, 4 A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2"R, 8K, 16K, 16KR (Four stapling positions: one staple at bottom left corner, one staple at top left corner, one slanted staple at top left corner, and two staples. ) 60 g/m2 to 105 g/m2 (16 lbs. Bond) 100 sheets (A4, A4R, B5, B5R, 8-1/2" x 11", 8-1/2" x 11"R) 50 sheets (A3, B4, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 7-1/4" x 10-1/2"R, 8K, 16K, 16KR) (50 sheets when the sheets are the same width but different lengths. ) *1 A5 and 5-1/2" x 8-1/2" sizes must be fed from the inserter. The maximum number of sheets that can be held varies depending on ambient conditions in the installation location, the type of paper, and the storage conditions of the paper. *3 Up to 50 sheets can be stapled when the sheets are the same width but different lengths (A3 and A4, B4 and B5, 11" x 17" and 8-1/2" x 11"). Note: Special media such as transparency film and label sheets cannot be stapled or punched. Punch module (for MX-FNX6 or MX-FNX7) specifications Model Hole punching MX-PNX4A* 2 holes A3, B4, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 8K, 16K, 16KR MX-PNX4B* 3 holes / 2 holes (switch manually) 3 holes: A3, B4, A4, 11" x 17", 8-1/2" x 11" 2 holes: A3, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R MX-PNX4C* 4 holes / 2 holes (switch manually) 4 holes: A3, B4, A4, B5, 11" x 17", 8-1/2" x 11" 2 holes: A3, A4, A4R, B5, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11"R MX-PNX4D* 4 holes, broad width A3, B4, A4, A4R, B5R, 11" x 17", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R Allowed paper sizes for punching Punchable paper weights 52 g/m2 to 163 g/m2 (16 lbs. Index) Power supply Dimensions Weight Supplied from finisher (for MX-M850) / saddle stitch finisher 95 mm (W) x 560 mm (D) x 170 mm (H) (3-3/4" (W) x 22-3/64" (D) x 6-45/64" (H)) Approx. 1. 3 kg (2. 9 lbs. ) * Can be installed on the finisher (MX-FNX6) or the saddle stitch finisher (MX-FNX7). Note: Special media such as transparency film and label sheets cannot be stapled or punched. 17 SPECIFICATIONS Saddle unit specifications Model Paper sizes*2 Paper weight Power supply Dimensions Weight Saddle stitch section MX-FNX8*1 A3, B4, A4W, A4, A4R, B5, B5R, A5, A5R, 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8K, 16K, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm 52 g/m2 to 300 g/m2 (16 lbs. Index) Supplied from the machine 600 mm (W) x 730 mm (D) x 980 mm (H) (23-5/8" (W) x 28-47/64" (D) x 38-37/64" (H)) Approx. 65 kg (143. 4 lbs. ) Stapling method Folding position Allowed paper sizes for saddle stitch stapling Allowed paper weights for saddle stitch stapling Fold in half and staple in two places on centreline Fold at centreline (can be adjusted in the System Settings) A3W, A3, B4, A4R, B5R, 12" x 18", 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R 60 g/m2 to 90 g/m2 (16 lbs. Cover) can be used. ) Maximum: 15 sheets / 10 sets (11 to 15 sheets), 15 sets (6 to 10 sheets), 30 sets (2 to 5 sheets) Number sheets for saddle stitch stapling / Number of sets *1 Requires installation of the finisher (MX-FNX5). *2 A5 and 5-1/2" x 8-1/2" sizes must be fed from the inserter. Folding unit specifications Model Paper sizes*2 Paper weight Power supply Dimensions Weight Folding section*4 MX-FDX1*1 A3, B4, A4W, A4, A4R, B5, B5R, A5, A5R, 11" x 17", 9" x 12", 8-1/2" x 14", 8-1/2" x 13-2/5", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, 7-1/4" x 10-1/2", 5-1/2" x 8-1/2", 5-1/2" x 8-1/2"R, 8K, 16K, 16KR, 318 mm x 469 mm, 318 mm x 234 mm, 312 mm x 440 mm, 312 mm x 220 mm, 320 mm x 450 mm, 320 mm x 225 mm 52 g/m2 to 300 g/m2 (16 lbs. Index) Supplied from the machine*3 177 mm (W) x 620 mm (D) x 980 mm (H) (6-31/32" (W) x 24-13/32" (D) x 38-37/64" (H)) Approx. 55 kg (121. 3 lbs. ) Folding speed Paper sizes Paper weight Folding style *1 *2 *3 *4 50 sheets/min (A4R, 8-1/2" x 11"R) A3, B4, A4R, 11" x 17", 8-1/2" x 14", 8-1/2" x 11"R 60 g/m2 to 90 g/m2 (16 lbs. Bond) Accordion fold Requires installation of the finisher (MX-FNX5). [. . . ] · Microsoft®, Windows®, Windows® 98, Windows® Me, Windows NT® 4. 0, Windows® 2000, Windows® XP, Windows Server® 2003, Windows® Vista and Internet Explorer® are registered trademarks or trademarks of Microsoft Corporation in the U. S. A. · PostScript is a registered trademark of Adobe Systems Incorporated. · Macintosh, Mac OS, AppleTalk, EtherTalk, LaserWriter, and Safari are registered trademarks or trademarks of Apple Computer, Inc. · Netscape Navigator is a trademark of Netscape Communications Corporation. [. . . ]