User manual SHARP MX-B402SC QUICK START GUIDE

[. . . ] 61 TONER SAVE MODE. . . . . . . . . . . . . . . . . . . . . 62 USER PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . 63 DISPLAYING TOTAL NUMBER OF COPIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 CHECKING THE TONER LEVEL . . 65 2 LOADING PAPER PAPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 BYPASS FEED (including special paper). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3 INSTALLING THE SOFTWARE SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CONFIGURING THE PRINTER DRIVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Raster data such as bitmap images cannot be adjusted. ) This allows you to bring out colour text and lines that are faint and difficult to see. ABCD ABCD 1 2 Click the "Advanced" tab in the printer driver setup screen. Check the "Text To Black" box and/or the "Vector To Black" box. · "Text To Black" can be selected to print all text other than white text in black. · "Vector To Black" can be selected to print all vector graphics other than white lines and areas in black. 5 43 Adjusting the brightness and contrast of the image (Image Adjustment) The brightness and contrast can be adjusted in the print settings when printing a photo or other image. These settings can be used for simple corrections when you do not have image editing software installed on your computer. 1 2 Click the "Advanced" tab in the printer driver setup screen. Click the "Image Adjustment" button. 3 Adjust the image settings. To adjust a setting, drag the slide bar or click the or button. 5 44 Adding a watermark to printed pages (Watermark) Faint shadow-like text can be added to the background of the printed image as a watermark. The text can be selected from a pre-stored list, or entered to create an original watermark. 1 2 Click the "Watermarks" tab in the printer driver setup screen. Select the watermark settings. Select a stored watermark from the pull-down menu. You can click the "Edit" button to edit the font and select other detailed settings. If you wish to create a new watermark, enter the text of the watermark in the "Text" box and click the "Add" button. 5 45 SAVING FREQUENTLY USED PRINT SETTINGS Settings configured on each of the tabs at the time of printing can be saved as user settings. Saving frequently used settings or complex colour settings under an assigned name makes it easy to select those settings the next time you need to use them. Saving settings at the time of printing (User Settings) Settings can be saved from any tab of the printer driver properties window. Settings configured on each tab are listed at the time of saving, allowing you to check the settings as you save them. For the steps for opening the printer driver, see "BASIC PRINTING" (p. 35). 1 Configure print settings on each tab and click the "Save" button on any tab. 2 After checking the displayed settings, enter a name for the settings (maximum of 20 characters). 5 · Up to 30 sets of user settings can be saved. Check the settings, and then press the start ( ) key again or click the "Scan" button in the TWAIN setting screen to start scanning. The scanned data will be transferred to the application. 6 51 Button Manager settings Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to change Button Manager settings, follow the steps below. "Outline of Button Manager" (p. 53) 1 Right-click the Button Manager icon ( ) on the task bar, and select "Settings" from the pop-up menu. The setting screen of Button Manager will open. If the Button Manager icon does not appear on the task bar, click the "Start" button, select "All Programs" ("Programs" in Windows 2000), select "Sharp Button Manager Y", and then click "Button Manager" to start Button Manager. 2 3 Click the tab of the scan menu that you want to set up. Select the start-up application in the "Application Selection" area. When the "Show TWAIN setting screen when scanning" checkbox is selected, the scan setting screen appears when scanning is executed to let you adjust the scanning conditions. Button Manager scan menu (factory default) Display/Button Manager menu SC1: SC2: SC3: SC4: SC5: SC6: Application that starts Sharpdesk Email FAX OCR Microsoft Word Filing 6 The start-up application must be installed before using. 4 5 Set up the "Colour Mode", "Edge" and other scan settings in the "Scan Setup" area. Click the "OK" button. This completes the settings. 52 Outline of Button Manager Button Manager is a software utility that allows you to use the scanner function at the machine. Button Manager allows you to configure six sets of scanning settings as a scan menu on the machine. To view Help for a setting, click the button in the upper right-hand corner of the window and then click the setting. To begin scanning using the machine's operation panel, settings must be established in the Control Panel after Button Manager is installed. For information on installing Button Manager and establishing the Control Panel settings, see "SETTING UP BUTTON MANAGER" (p. 23). For information on scanning using the machine's operation panel, see "SCANNING USING THE KEYS ON THE MACHINE" (p. 50). [. . . ] Then follow the step 2 onwards. 2 Remove any originals that have not yet been scanned from the document feeder tray. For the original(s) stuck in the SPF, do not remove manually. See the step 3. 3 Press the copy ratio display (%) key. The originals that were being scanned in the SPF will be discharged and the number of original sheets to be returned will blink in the display. Place the displayed number of original sheets back in the document feeder tray together with the original sheets removed in step 2. Display of number of original sheets to be returned 9 If "SPF automatic original discharge time" is enabled in the user programs, the originals in the SPF will be automatically discharged after the set time elapses. ("USER PROGRAMS" (p. 63)) 85 DEVELOPER REQUIRED When the developer replacement required ( ) indicator lights up, the developer should be replaced. [. . . ]