User manual SHARP MX-5500N/6200N/7000N

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP MX-5500N/6200N/7000N. We hope that this SHARP MX-5500N/6200N/7000N user guide will be useful to you.


SHARP MX-5500N/6200N/7000N : Download the complete user guide (1497 Ko)

You may also download the following manuals related to this product:

   SHARP MX-5500N/6200N/7000N (926 ko)
   SHARP MX-5500N/6200N/7000N (1095 ko)
   SHARP MX-5500N/6200N/7000N (1097 ko)
   SHARP MX-5500N/6200N/7000N (1957 ko)
   SHARP MX-5500N/6200N/7000N (1089 ko)
   SHARP MX-5500N/6200N/7000N (2721 ko)
   SHARP MX-5500N/6200N/7000N (1094 ko)
   SHARP MX-5500N/6200N/7000N (918 ko)
   SHARP MX-5500N/6200N/7000N (2732 ko)
   SHARP MX-5500N/6200N/7000N (938 ko)
   SHARP MX-5500N/6200N/7000N (2368 ko)
   SHARP MX-5500N/6200N/7000N (923 ko)
   SHARP MX-5500N/6200N/7000N annexe 1 (2664 ko)
   SHARP MX-5500N/6200N/7000N annexe 2 (6923 ko)
   SHARP MX-5500N/6200N/7000N annexe 3 (6764 ko)
   SHARP MX-5500N/6200N/7000N annexe 4 (850 ko)
   SHARP MX-5500N/6200N/7000N annexe 5 (3076 ko)
   SHARP MX-5500N/6200N/7000N annexe 1 (2705 ko)
   SHARP MX-5500N/6200N/7000N annexe 2 (4331 ko)
   SHARP MX-5500N/6200N/7000N annexe 3 (7004 ko)
   SHARP MX-5500N/6200N/7000N annexe 4 (2562 ko)
   SHARP MX-5500N/6200N/7000N annexe 5 (865 ko)
   SHARP MX-5500N/6200N/7000N annexe 6 (3103 ko)
   SHARP MX-5500N/6200N/7000N annexe 1 (2724 ko)
   SHARP MX-5500N/6200N/7000N annexe 2 (8348 ko)
   SHARP MX-5500N/6200N/7000N annexe 3 (6833 ko)
   SHARP MX-5500N/6200N/7000N annexe 4 (2558 ko)
   SHARP MX-5500N/6200N/7000N annexe 5 (870 ko)
   SHARP MX-5500N/6200N/7000N annexe 6 (3112 ko)
   SHARP MX-5500N/6200N/7000N annexe 1 (1104 ko)

Manual abstract: user guide SHARP MX-5500N/6200N/7000N

Detailed instructions for use are in the User's Guide.

[. . . ] MODEL: MX-5500N MX-6200N MX-7000N System Settings Guide Table of Contents About This Manual . 5 3 SYSTEM SETTINGS (ADMINISTRATOR) 1 SYSTEM SETTINGS System Settings . 78 2 SYSTEM SETTINGS (GENERAL) Accessing the System Settings (General) . 92 4 SYSTEM SETTINGS FOR FAX System Settings for Fax (General) List . [. . . ] Promptly contact your dealer or nearest authorised service representative to have a service technician cancel the setting and resolve the colour-related problem. Disabling of Finisher (When a saddle stitch finisher or finisher is installed. ) This setting is used to disable the saddle stitch finisher or finisher, such as when the unit malfunctions. Disabling of Inserter (When an inserter is installed. ) This setting is used to prohibit the use of the inserter, such as when it malfunctions. Fusing Control Settings This is used to set the weight of paper from 60 to 105 g/m2 (16 to 28 lbs. ) for control of fusing temperature by paper weight. To make this setting take effect, press the [POWER] key ( [POWER] key ( ) again to turn the power on. ) to turn the power off, wait briefly, and then press the 64 Copy Function Settings The following settings are related to copying. Default settings selected with these settings apply to all functions of the machine (not just the copy function). Initial Status Settings The copier settings are reset when the [POWER] key ( ) is turned on, when the [CLEAR ALL] key ( ) is pressed, or when the auto clear interval has elapsed. The following settings can be changed: Item Colour Mode Paper Tray Exposure Type Copy Ratio Configure default colour mode settings. If this setting is used to change the default setting for the duplex function to other than "1-Side to 1-Side" and the duplex function or automatic document feeder fails or is disabled, the setting will revert to "1-Side to 1-Side". Set the print output method and output tray that are selected by default. This returns all items to the factory default settings. Description 2-Sided Copy Output Return to the Defaults 65 Other Settings Copy Exposure Adjustment This is used to adjust the exposure level when [Auto] is used for the copy exposure. Colour Use this to set the copy exposure level in colour mode for the document glass and for the automatic document feeder. Black & White Use this to set the copy exposure level in black & white mode for the document glass and for the automatic document feeder. Initial Margin Shift Setting This is used to set the default margin shift amount. Specify a value from 0 mm (0") to 20 mm (1") in increments of 1 mm (1/8") for both the front and reverse sides. Erase Width Adjustment This is used to set the default erase width for erase copy. Specify a value from 0 mm (0") to 20 mm (1") in increments of 1 mm (1/8") for both edge erase and centre erase. Rotation Copy Setting When the original and paper are placed in different orientations, this function automatically rotates the image 90 degrees to enable correct copying on the paper. · Image rotation can only take place when automatic paper selection or automatic ratio selection is enabled. · The Rotation Copy setting must be enabled when copying an A5 (5-1/2" x 8-1/2") size original on A5R (5-1/2" x 8-1/2"R) paper. Card Shot Settings This is used to set the default original size for the card shot function. Both the X (horizontal) and Y (vertical) dimensions of the original can be set from 25 mm (1") to 210 mm (8-1/2") in increments of 1 mm (1/8"). Fit to Page Enable this setting to have the [Fit to Page] key always appear in the card shot screen. Add or Change Extra Preset Ratios Two enlargement preset ratios (101% to 400%) and two reduction preset ratios (25% to 99%) can be added. An added preset ratio can also be changed. Preset ratios other than added preset ratios cannot be changed. Automatic Saddle Stitch (When a saddle stitch finisher is installed. ) This is used to have saddle stitch stapling take place automatically when the pamphlet copy function is used. Initial Tab Copy Setting Setting a Maximum Number of Copies This is used to set the maximum number that can be entered for the number of copies (number of continuous copies). This is used to set the default image shift width (tab width) for tab copying. The default width can be set from 0 mm (0") to 20 mm (5/8") in increments of 1 mm (1/8"). 66 Disabling Deletion of Job Programs This is used to prohibit the deletion and changing of copy settings stored in job programs. B/W 600dpi x 600dpi Scanning Mode for Document Feeder The resolution for copying in black and white using the automatic document feeder can be changed from 600 x 300 dpi to 600 x 600 dpi (high quality mode). When high quality mode is used, fine print and thin lines are reproduced with greater clarity, however, the scanning speed is slower. When high quality mode is not selected, the following conditions must be satisfied in order to scan at 600 x 300 dpi and attain the fastest speed. · Do not copy in black and white with the [COLOUR START] key ( ). Disabling of Bypass-Tray in Duplex Copy This is used to prohibit the use of the bypass tray when making two-sided copies. The bypass tray is often used to feed label sheets, transparency film, and other special media for which two-sided copying is prohibited. If a sheet of one of these special media enters the reversing unit, a misfeed or damage to the unit may result. If special media for which two-sided copying is prohibited is often used, it is recommended that you enable this setting. Disabling of Auto Paper Selection This setting is used to disable the Auto Paper Selection function. [. . . ] When this setting is enabled and a fax consisting of 2 or more pages is received (the pages must be the same size), the pages are printed on both sides of the paper. Auto Receive Reduce Setting When a fax is received that includes the sender's name and number, the received image is slightly larger than the standard size. This setting is used to automatically reduce the image to fit the standard size. · If Auto Receive Reduce is disabled, the edges of the image outside the standard size will be cut off. However, the image will be clearer because it will be printed at the same size as the original. · Standard sizes are sizes such as A4 and B5 (8-1/2" x 11" and 8-1/2" x 5-1/2"). 104 Print Style Setting This setting determines the paper selection condition when printing received faxes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP MX-5500N/6200N/7000N




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP MX-5500N/6200N/7000N will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.