User manual SHARP MD-S301H2

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP MD-S301H2. We hope that this SHARP MD-S301H2 user guide will be useful to you.


SHARP MD-S301H2 : Download the complete user guide (572 Ko)

You may also download the following manuals related to this product:

   SHARP MD-S301H2 (554 ko)
   SHARP MD-S301H2 (627 ko)
   SHARP MD-S301H2 (632 ko)
   SHARP MD-S301H2 (632 ko)
   SHARP MD-S301H2 (633 ko)
   SHARP MD-S301H2 (610 ko)
   SHARP MD-S301H2 (568 ko)

Manual abstract: user guide SHARP MD-S301H2

Detailed instructions for use are in the User's Guide.

[. . . ] CAUTION: At full power prolonged listening to a personal stereo may damage the user's hearing. The model is in compliance with the law in case of using it with the SHARP earphones (model number RPHOH0004AWZZ). Q CAUTION Use the portable minidisc recorder only in accordance with the instructions given in this manual and do not attempt to interfere with the interlock switch or make any other adjustment as this may result in exposure to hazardous radiation. It contains dangerous voltages, always remove mains plug from the main outlet socket before any service operation or when not in use for a long period. [. . . ] a series of tracks can be recorded as one by disabling the auto marker function see page 18. Z When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. Z Track numbers may not be created properly, depending on the connected stereo system. This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. Z Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise. Z The track numbers on the playback side may not match the track numbers recorded on the MiniDisc. Adjust the recording level so that the maximum sound volume from the source makes the reading swing between --- 4 dB and 0 dB. The track number will be increased by one each time you interrupt a recording. The unit automatically pauses when the microphone does not pick up any sound for 3 seconds or more. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. To cancel the hold mode Move the HOLD switch away from the safety position (the opposite direction of the arrow). If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. , , Beep sound , , Auto play With a MiniDisc inserted, press the MODE/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. Auto power save function automatically adjusts the sound skip memory storage to be from 5 to 10 seconds depending on playback conditions, this saves battery power. If the MiniDisc unit is used in areas of much vibration, it may be necessary to fix the sound skip memory to 10 seconds "Psave OFF". This will improve performance under difficult conditions but uses more power. The digital recording level you set will be kept even after cancelling recording. [. . . ] Can't REC z Recording cannot be performed correctly due to vibration or shock. Can't WRITE z Cannot save the TOC information correctly to a Mini- z Replace the disc with another recordable disc. Er-MD (**) HOLD LOCKED NO DISC z The microprocessor has reported a system fault and the unit is out of order. Z No output signal comes out from the connected z If the portable CD player has a function to prevent sound skips, deactivate it. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP MD-S301H2




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP MD-S301H2 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.