User manual SHARP MD-MT18H

[. . . ] ······ Leggere le pagine i a vi e I-1 a I-44. NEDERLANDS ······ Raadpleeg de bladzijden i t/m vi en N-1 t/m N-44. ENGLISH ······ Please refer to pages i to vi and E-1 to E-44. BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN SPECIAL NOTES q Audio-visuelles Material kann Urheberrechte umfassen, die ohne Genehmigung des Eigentümers dieser Urheberrechte nicht aufgenommen werden dürfen. q Le matériel audio-visuel peut comporter des oeuvres faisant l'objet de droits d'auteur qui ne peuvent être enregistrées sans l'autorisation du possesseur du droit d'auteur, veuillez vous référer aux réglementations nationales en vigueur. q El material audiovisual puede consistir en trabajos que tengan derechos de autor y que no deben grabarse sin la autorización del poseedor de dichos derechos de autor. [. . . ] MiniDiscs, compared to ordinary cassette tapes, have very little noise. If the volume is adjusted according to your usual expectations of noise, high volume may damage your hearing. In particularly crowded places (such as on trains or buses), reduce the volume. ENGLISH E-12 -Playback- Advanced Playback , , To locate the beginning of a track To move to the beginning of the next track: Press the button during playback. To restart the track being played: Press the button during playback. Useful Features -Advanced Playback- To locate the next track: Press the button whilst the unit is stopped. , , To locate the desired portion For audible fast forward: Press and hold down the For audible fast reverse: Press and hold down the button during playback. button during playback. To locate the previous track: Press the button whilst the unit is stopped. z To skip a number of tracks at one time, press the or button repeatedly until the desired track number is shown. z When you press the PLAY/PAUSE button, playback starts from the beginning of the track. z When the end of the last track is reached during fast forward, the unit will enter the pause mode. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. E-13 ENGLISH , , Random play or repeat play During playback, press the MODE/CHRG button repeatedly to select the playback mode. RANDOM RANDOM Random play Repeat play of tracks in random order Repeat play of all of the tracks No display Normal playback , , To play at double speed Press the ENTER/SYNC button whilst a MiniDisc recorded in the monaural long-play mode is being played. Notes: z If a track recorded in the stereo mode is reached during fast playback, the fast playback mode will be cancelled. z Depending on the contents recorded on a MiniDisc, it may be difficult to hear them. To interrupt fast playback Press the PLAY/PAUSE button during playback. When the PLAY/PAUSE button is pressed again, the unit will resume fast playback. z If the playback mode is selected whilst stopped, press the PLAY/PAUSE button to start playback. z When "TOC" is displayed, random play or repeat play is impossible. (You cannot select the order of the tracks. ) After all of the tracks have been played once each in random order, the unit will stop automatically. To add a recording to such a MiniDisc, slide the accidental erase prevention tab back to its original position. , , Helpful tip when attaching a label Note: When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be possible to remove it. z If the label peels off or partially lifts away, replace it with a new one. z Attach the label only in the specified location. ENGLISH E-18 -Advanced Recording- Advanced Recording (continued) , , About track numbers 1. Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (Auto marker function). A series of tracks can be recorded as one by disabling the auto marker function see page 18. z When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. z Track numbers may not be created properly, depending on the connected stereo system. , , About sampling rate converter This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders. Useful Features -Advanced Recording- , , Note for digital recording 2. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. [. . . ] z Erase all of the tracks, and then record again. TEMP OVER z The temperature is too high. TOC FORM (**) z There is an error in the recording signal. TOC FULL z There is no space left for recording character in- z Replace it with another recordable disc. DISC z A disc which contains data other than music was z A disc which contains non-music data cannot be played. z Replace it with another recorded disc. Number or symbol appears in (*) position. ENGLISH E-40 -Error Messages- PROTECTED z The write protection tab of a MiniDisc is set to the z Move the write protection tab back to its original posiprotected position. [. . . ]