User manual SHARP LC-40LE530E

[. . . ] Contents Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] For highlighting lines you see, use " " or " " button. You can enter the frequency range manually by using the numeric buttons on the remote control. Set Start and Stop Frequency as desired by using numeric buttons on the remote control. After this operation, you can set Search Step as 8000 KHz or 1000 KHz. If you select 1000 KHz, the Tv will perform search process in a detailed way. Note: If you select an extended gap between Start and Stop frequency rate, automatic search duration will take a longer time. Analogue Fine Tune · Select Analogue Fine Tune from the Installation menu by using " " or " " and OK buttons. Analogue Fine Tune feature will not be available if there are no analogue channels, digital channels and external sources stored. When finished, press OK button again. Clear Service List (*) (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Press " " or " " button to select Clear Service List and then press OK. The following OSD will be displayed on the screen: Network Channel Scan Select Network Channel Scan from the installation menu by using " " or " " and OK buttons. Select Digital Aerial or Digital Cable and press OK button to continue. The following message will English - 18 A01_MB61_[GB]_1910UK_IDTV_TC_PVR_BRONZE16_40942LED_100Hz_ROCKER_10072642_5018xxxx. indd 18 17. 05. 2011 19:34:23 Select YES and press OK to continue or select NO and press OK button to cancel. Deleting a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel. · Select the channel that you want to delete and select Delete option. Press OK button to continue. Managing Stations: Channel List The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. Select Channel List item by using " " or " " button. Press OK to view menu contents. Renaming a Channel · Select the channel that you want to rename and select Edit Name option. · Pressing " " or " " button moves to the previous/ next character. Pressing " " or " " button toggles the current character, i. e. , `b' character becomes `a' by " " and `c' by " ". Pressing the numeric buttons `0. . . 9' replaces the highlighted character with the characters printed above the button one by one as the button is pressed. Select Edit Channel List to manage all stored channels. Use " " or " " and OK buttons to select Edit Channel List. · When finished, press OK button to save. Press "MENU" to cancel. Operating the Channel List Locking a Channel You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. [. . . ] In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu. · In Upgrade Options menu select Scan for upgrade and press OK button. · If a new upgrade is found, it starts to download the upgrade. When download completes with success a message is displayed for reboot to activate new software. [. . . ]