User manual SHARP LC-32SH330E

[. . . ] To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER'S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RECOMMENDED BY THE MANUFACTURER. [. . . ] AVC System (rear view) Component video cable (commercially available) When using component video cable, select "COMPONENT" for "Input Select" in the menu. AV cable (commercially available) S-video cable (commercially available) DVD player TV TV POWER AV MODE CBL VCR DVD /SAT /LD /DTV 2 CC ANT-A/B Virtual INPUT Select the desired signal type on "Input Select" in the "Option" menu. Input Select] MTS TWIN PICTURE SELECT SUB FREEZE INPUT VIEW MODE TWIN CH Auto LEARN DISPLAY SLEEP EDIT/ COMPONENT AV-Y/C Display The setting is stored and can be selected on the "INPUT SOURCE" menu. INPUT button NOTE Each time INPUT is pressed, the input source toggles. If the DVD image does not come in clearly, you may need to change the input signal type setting on the "Input Select" menu. Refer to your DVD player operation manual for the signal type. Displaying a DVD image 1 To watch a DVD image, select "INPUT1" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 52. ) INPUT SOURCE TV INPUT1 INPUT2 INPUT3 INPUT4 PC 42 Using external equipment Watching a VCR image Connecting a VCR You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment. NOTE The S-video terminal has priority over the video terminals. AVC System (rear view) AV cable (commercially available) S-VIDEO cable (commercially available) VCR TV TV POWER AV MODE CBL VCR DVD /SAT /LD /DTV Displaying a VCR image To watch a VCR image, select "INPUT2" from the "INPUT SOURCE" menu using INPUT on the remote control unit or on the Display. (See page 52. ) When connecting to the INPUT 2 terminals, select "INPUT2". ANT-A/B Virtual INPUT MTS TWIN PICTURE SELECT SUB FREEZE INPUT CC VIEW MODE TWIN CH DISPLAY SLEEP EDIT/ LEARN INPUT SOURCE Display TV INPUT1 INPUT2 INPUT3 INPUT button INPUT4 PC You only need to select the input source on the "INPUT SOURCE" menu. NOTE Each time INPUT is pressed, the input source toggles. Refer to your VCR operation manual for the signal type. 43 Using external equipment Watching broadcasts via a Digital TV tuner Connecting a Digital TV tuner You can use the INPUT 3 terminal when connecting a Digital TV tuner and other audiovisual equipment. AVC System (rear view) Component video cable (commercially available) When using component video cable, select "COMPONENT" for "Input Select" in the menu. S-video cable (commercially available) AV cable (commercially available) DVI cable (commercially available) When using DVI cable, select "DVI" for "Input Select" in the menu. NOTE When the device has a 15-pin terminal, use a commercially available D-sub cable to connect it. Digital TV tuner TV TV POWER AV MODE CBL VCR DVD /SAT /LD /DTV 2 CC ANT-A/B Virtual INPUT Select the desired signal type on "Input Select" in the "Option" menu. Input Select] MTS TWIN PICTURE SELECT SUB FREEZE INPUT VIEW MODE TWIN CH Auto COMPONENT DISPLAY SLEEP EDIT/ LEARN AV-Y/C DVI Display The setting is stored and can be selected on the "INPUT SOURCE" menu. INPUT button NOTE Each time INPUT is pressed, the input source toggles. If the Digital TV tuner image does not come in clearly, you may need to change the input signal type setting on the "Input Select" menu. Digital signal input: VGA (60Hz), 480p, 1080i, 720p Analog signal input: VGA (60Hz), 540p, 1080i Use the PC INPUT terminals on the front of the AVC System when connecting a PC. (See page 50. ) CAUTION Make sure external speakers have 4 ohm and 10 watt specifications. Incorrect connection may cause a short. Make sure to connect the speaker terminal and cable polarity (L, +) properly The speaker terminals have plus (L) and minus (+) polarity. When connecting the left/right speakers, be sure to connect the plus/minus terminals with the correct cables. NOTE Unplug the AC cord from the AC outlet before installing the speakers. 49 Useful adjustment settings Selecting speakers You can output audio using the supplied speaker (internal) or other external speakers. MENU TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER SET/ ENTER DTV/SAT INFO FAVORITE CH A POWER B INPUT C VOL VCR REC D VOL RECEIVER AV input mode PC input mode 1 Press MENU and the TV MENU screen displays. Press c/d to select "Setup". 1 Press MENU and the PC MENU screen displays. Press c/d to select "Setup". 2 3 2 3 Press a/b to select "Speaker", and then press SET/ENTER. TV MENU Setup EZ Setup CH Setup Speaker Parental CTRL Position Picture Flip Language [Standard] [English] [Internal] [Setup . . . Speaker] Option Press a/b to select "Speaker", and then press SET/ENTER. PC MENU Setup Speaker Input Signal Auto Sync. Speaker] Option [Internal] 4 4 Press c/d to select "External" or "Internal", and then press SET/ENTER. Press c/d to select "External" or "Internal", and then press SET/ENTER. Internal Internal External External 50 Useful adjustment settings Auto Sync. adjustment (PC input mode only) For automatically adjusting the PC image. MENU Fine Sync. adjustment (PC input mode only) Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image. MENU TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE RETURN SOURCE POWER TV/SAT/DVD MENU DTV/DVD TOP MENU DTV/SAT GUIDE SET/ ENTER RETURN DTV/SAT INFO SOURCE POWER FAVORITE CH A POWER B INPUT C VOL VCR REC SET/ ENTER D VOL FAVORITE CH A POWER B INPUT C VOL DTV/SAT INFO VCR REC RECEIVER D VOL 1 2 Press MENU and the PC MENU screen displays. Press c/d to select "Setup". RECEIVER 1 2 3 4 Press MENU and the PC MENU screen displays. [. . . ] Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp. The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. [. . . ]