User manual SHARP LC-20SH21U OPERATION MANUAL

[. . . ] LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the TV's model and serial numbers in the space provided. The numbers are located at the rear of the TV. Model No. : Serial No. : IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN alert the user to the presence of uninsulated to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature PORTUGUÊS 1 ESPAÑOL FRANÇAIS ENGLISH IMPORTANT INFORMATION (Continued) CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. [. . . ] Selected item Red Green Blue button Weaker red Weaker green Weaker blue button Stronger red Stronger green Stronger blue Deinterlaced: Select image display mode to Progressive or Interlace (ON, OFF) · When resetting the items in the "USER" setting to factory preset values, perform the "Reset Picture" procedure. Cinemotion: Selected item Description Display image in Progressive mode Display image in Interlace mode picture quality (ON, OFF). ON OFF Noise Reduction: Reduce Noise from TV screen (Off, Low, Mediun, High). Selected item ON OFF Description Set Cinemotion to ON Set Cinemotion to OFF Selected item Off Low Medium High Description Set Noise Reduction to OFF Set Noise Reduction to Low level Set Noise Reduction to Medium level Set Noise Reduction to High level 20 Basic Adjustment Settings (Continued) ADC Settings: Adjust ADC Settings of your TV (Horizontal, Vertical, Phase, Auto Sync). · Make sure to select the input signal from the following PC Compatibility Chart before connecting a PC. Audio You can adjust the audio to your preference with the following audio settings. 1 2 Selected item Horizontal button Move the image Horizontal position to the left. Adjust image clarity Description Automatically adjust the settings for the current input signal button Move the image Horizontal position to the right. Move the image Vertical position up. Press MENU on the remote control to display the menu screen. Press / to select the "Audio" menu. 3 4 5 6 Press ENTER to enter the Audio menu list. Press / to select the desired menu item. Vertical Phase Selected item Auto Sync Press ENTER to select the menu item. Press MENU Bass, Treble & Balance Use / / / to select or adjust your favorite bass, treble and balance settings. · ADC Settings is only available when selecting INPUT 3(Component) or INPUT 5(PC). PC Compatibility Chart PC/MAC Resolution 720 VGA 640 400 480 Horizontal Vertical Frequency Frequency (Hz) (kHz) 31. 5 70 31. 5 60 37. 9 72 37. 5 75 35. 1 56 37. 9 60 48. 1 72 46. 9 75 48. 4 60 45. 0 60 47. 368 60 34. 9 67 Selected item Bass Treble Balance button For weaker bass For weaker treble Decrease audio from the left speaker button For stronger bass For stronger treble Decrease audio from the right speaker PC SVGA XGA WXGA 800 600 Optical Out (SPDIF) Select the audio format for Optical Out (AC3, PCM). MAC 13" VGA 1, 024 768 1, 280 720 1360 768 640 480 · The numerical values of resolutions and frequencies mentioned above are standard. They may differ from the values when actually displayed. Reset Picture: Reset picture settings to factory preset values. Selected item AC3 PCM Description Select surround audio format Select stereo audio format · Optical Out (SPDIF) is only available when receiving digital broadcasting. 21 Basic Adjustment Settings (Continued) Audio (countinued) Analog Preference Select the analog audio preference (Mono, Stereo, SAP). TV Speaker Select the audio output speaker (Internal, External, Both). Selected item Mono Stereo SAP Description Set prefered audio format to Mono Set prefered audio format to Stereo Set prefered audio format to Secondary Audio Program Selected item Description Internal External Both Audio from internal speaker only Audio from external speaker if your TV is connected to a home theater or stereo Audio from both internal and external speakers · Analog Preference is only available when receiving the analog broadcasting. Digital Preference Audio Out Select the analog audio out value (Fix, Variable). Select the digital Broadcasting prefered language (English, French, Spanish). Selected item English French Spanish Description Set Digital Broadcasting prefered language to English Set Digital Broadcasting prefered language to French Set Digital Broadcasting prefered language to Spanish Selected item Fix Variable Description Analog audio output volume is adjustable Reset Audio: · Digital Preference is only available when receiving the digital broadcasting. Reset audio settings to factory preset values. Audio Track Select the audio tracks available in digital broadcasting. · Audio Track is only available when receiving digital broadcasting. · Selectable number of tracks in OSD screen is varied depending on the number of tracks avalible in the digital broadcasting received. 22 Basic Adjustment Settings (Continued) Channels You can adjust the channel settings to your preference with the following items. Favorites: (FAVORITE CH) This function allows you to program channels in 4 different lists (FAV A~D). By setting the favorite channels in advance, you can select your favorite channels easily. 1 2 3 4 5 6 Press MENU on the remote control to display the menu screen. Press / to select the "Channels" menu. Press ENTER to enter the Channels menu list. Press / to select the desired menu item. Selected item Select List Unmark All Description Select which favorite channel list you want to edit Remove all channels from current favorite channel list Rename the favorite channel list Sort or unsort marked channel in the list Press ENTER to select the menu item. Press MENU Rename List Sort Mark/ Undo Sort Master List Displays the Master Channel List of all scanned channels, you can also edit the list. <<Example:>> How to add channels to the list. Press / to select channel and press ENTER to add channel to the favorite channel list. * You can also use FAVORITE CH A~D on your remote control to add or remove the current channel from the favorite channel list. Scan Channels: Automatically search and add the broadcasting channels to the Master Channel List. Selected item Mark All Unmark All Analog Only Digital Only Description Select all channels from Master Channel List Unselect all channels from Master Channel List Select all analog channels from Master Channel List Select all digital channels from Master Channel List Selected item Antenna Cable Description Scan channels from Antenna Signal Scan channels from Cable Signal (Automatic, STD, IRC, HRC) <<Example:>> How to perform Scan Channels. All searched channels will be added to the Master Channel List. · Depends on the setting, you may be requested to enter PIN number to select Scan Channels. 23 Basic Adjustment Settings (Continued) Channels (countinued) Find Channel: Manually search and add the broadcasting channels to the Master Channel List. Settings You can adjust the system settings to your preference with the following items. 1 2 <<Example:>> How to perform Find Channel 1. If the channel is available, it will be added to the Master Channel List. Press MENU on the remote control to display the menu screen. Press / to select the "Settings" menu. 3 4 5 6 Press ENTER to enter the Settings menu list. Press / to select the desired menu item. Press ENTER to select the menu item. Press MENU · Depends on the setting, you may be requested to enter PIN number to select Find Channels. Menu Language Select the language for menu (English, French, Spanish). Channel Name Edit: This function allows you to edit channel name in channel list. Selected item English French Spanish Description Set Menu Language to English Set Menu Language to French Set Menu Language to Spanish <<Example:>> How to perform Channel Name Edit. Select "Done" and press ENTER Name Edit. · Channel Name is limited to 7 characters. 24 Basic Adjustment Settings (Continued) Settings (countinued) Closed Captions: · This LCD TV set is equipped with an internal Closed Caption decoder. "Closed Caption" is a system which allows conversations, narration, and sound effects in TV programs and home videos to be viewed as captions on the TV screen (see the illustration). [. . . ] The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. [. . . ]