User manual SHARP LC-17SH1E

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC-17SH1E. We hope that this SHARP LC-17SH1E user guide will be useful to you.


SHARP LC-17SH1E : Download the complete user guide (2772 Ko)

Manual abstract: user guide SHARP LC-17SH1E

Detailed instructions for use are in the User's Guide.

[. . . ] LC-17SH1E LCD COLOUR TELEVISION OPERATION MANUAL Introduction / Safety is Important Introduction Thank you for purchasing this product which has been designed and manufactured to give you many years of trouble-free service. You may already be familiar with using a similar product, but do please take time to read these instructions - they have been written to ensure you get the very best from your purchase. Safety is Important To ensure your safety and the safety of others, please ensure you read the Safety Instructions before you operate this product. This apparatus complies with the requirements of Council Directives 89/336/EEC and 73/23/EEC as amended by Council Directive 93/68/EEC. SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. [. . . ] Repeat steps 3 4 to change the order of other channels. SORT CH 5 CH 40 : SELECT OK : SET MENU : RETURN 5. Press MENU three times to return to normal TV screen. 19 TV Operations After completing the connection and presetting the channels, follow these steps for viewing. Press Power The standby on the top of the unit or remote control to turn on the unit. Press the two digits in accordance to the channel numbers required. PM/?The VOLUME can be adjusted by pressing the @ + or ­ on the remote control. VOLUME 25 Note: On screen display will disappear after 4 seconds. Automatic Power Shut Off If a station being viewed stops broadcasting for about 15 minutes, the unit will automatically shut itself off and go into standby mode. 20 Convenient Functions The following functions are available from the remote control handset only. TV/EXT(AV) Selection For receiving the desired signal: Press TV position - to view a normal TV. CH 5 (INPUT) to select the TV or EXT(AV) mode. EXT(AV) position - to receive through the direct Video input. EXT1 (from 21 pin SCART socket on the rear left), EXT2 (from 21 pin SCART socket on the rear right), EXT3 (from Audio/Video in sockets on the left side) or PC (from PC IN socket on the left side) indicator appears on the screen in AV mode. -:6 (FLASH BACK) This button allows you to go back to the previous channel by pressing again to return to the channel you were watching. (FLASH BACK). Press this button DISPLAY When you press (DISPLAY) once, the channel number and screen picture size etc. MUTE When (MUTE) is pressed, the TV sound will be turned off completely. The clock will count down 10 minutes each time the button is pressed in the order of 120, 110, 100, . . . 20, 10, 0. After the sleep time is programmed, the display will disappear and will reappear momentarily at every 10 minutes. To confirm the sleep time setting, press SLEEP once and the remaining time will be momentarily displayed. To cancel the sleep time, press SLEEP repeatedly until the display turns to 0. SKIP FUNCTION After all channels available in your area have been set in memory, you can skip unwanted channels as follows. Note: To cancel the SKIP function, press Direct Channel Selection buttons to select the channel which you want to cancel, then press SKIP again. 21 ON/OFF Timer The on timer feature allows you to automatically turn on your TV after a preset amount of time (up to 12 hours and 59 minutes) on the selected channel. The off timer also allows you to turn off your TV after a preset amount of time. Then press OK. ON TIMER OFF TIMER SET 00:00 SET 00:00 CH 1 : SELECT OK : SET MENU : RETURN 2. Press or to enter the hours and minutes at which you want your TV to automatically switch on. ON TIMER · For rapid time change in ten minute intervals, press and hold or . Press . OFF TIMER SET 10:30 SET 00:00 CH 1 : ADJUST OK : SET : SELECT MENU : RETURN 3. Press or to select the channel you wish to display when your TV switches on. Press OK. ON TIMER OFF TIMER SET 10:30 SET 00:00 CH 1 : ADJUST OK : SET : SELECT MENU : RETURN Put your TV into Standby mode by pressing If you wish to set the OFF TIMER, press or on the remote control. [. . . ] The sub-page can only be displayed when the broadcaster transmits it. To leave sub-page mode push (SUB PAGE) again. Within the sub-page mode no other pages other than the sub-pages of the selected page can be called. To call other teletext pages you must leave the sub-page mode. Magnifying To magnify the letters push (F/T/B). You can magnify either the upper or the lower half of the screen. Each push on (F/T/B) switches between the screen's upper and lower half and the full screen. (F/T/B = Full / Top / Bottom) REVEAL Pushing REVEAL will give you the hidden answers to the questions on a Quiz-page. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC-17SH1E




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC-17SH1E will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.