User manual SHARP ER-A280F/N OPERATION MANUAL

[. . . ] Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. Special Note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). For details, please visit http://mp3licensing. com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. 10 : TINSEA438AWZZ *TINSEA438AWZZE%*| 13E R MW 1 Special Notes WARNINGS ● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. [. . . ] ● Bitrate which is supported by MP3 is 32~320 kbps, WMA is 64~160 kbps. ● For MP3/WMA files, please put “. MP3” “. WMA” extension. ● This unit can display Folder Name or File Name up to 32 characters. ● Total number of folders read is 999 including folder with non-playable file. ● The display playback time may not be displayed correctly when playing back a variable bitrate file. ● The ID3TAG information supported are TITLE, ARTIST and ALBUM only. Title name, artist name and album name can be displayed by pressing the DISPLAY button during file playback or pause mode. ● WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back. ■ To remove USB memory device 1 Press the (USB ) button to stop playback. 2 Disconnect USB memory device from the USB terminal. Notes: ● SHARP will not be held liable for the loss of data while the USB memory device is connected to the audio system. ● Files compressed in MP3 and/or WMA format can be played back when connected to the USB terminal. 4 Within 30 seconds, press the MEMORY button to store that station in memory. If the “MEMORY” and preset number indicators disappear before the station is memorised, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased. Note: The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead becomes disconnected. 3 Within 30 seconds, press the PRESET ( or ) button ■ To recall a memorised station Press the PRESET ( or ) button for less than 0. 5 seconds to select the desired station. ■ To scan the preset stations The stations saved in the memory can be scanned automatically. (Preset memory scan) 1 Press the PRESET ( or ) button for more than 0. 5 seconds. The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. 2 Press the PRESET ( or ) button again when the desired station is located. ■ To erase entire preset memory 1 Press the ON/STAND-BY button to turn the power on. 2 Press the FUNCTION button (main unit) repeatedly or TUNER button (remote control) to select Tuner function. 3 In Tuner function, press the CLEAR button until “Tuner Clear” appears. E-15 Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. [. . . ] ● Is the File Name written in Chinese or Japanese characters? ● Playback does not start. ● Wrong file name display. ■ Remote control Symptom ● The remote control does not operate. ● Does the remote control sensor receive strong light? ■ Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, etc. ) or on the transmitter on the remote control. If this happens, leave the power on with no disc in the unit until normal playback is possible (about 1 hour). [. . . ]