User manual SHARP CP-SW1000H

[. . . ] [. . . ] The volume indicator lights up blue. 1 Whilst pushing the locking tab towards the centre of the remote control, slide out the battery holder. Back of remote control (Lights up blue) Locking tab 2 2 Remove the old battery from the battery holder, insert the new battery and then slide the battery holder back into the remote control. Battery holder Positive (+) side up Polarity (+) symbol Locking tab Battery type To set the unit to stand-by mode: Press the ON/STAND-BY button again. The STAND-BY indicator lights up red. (Turns red) TINSEA210AWZZ 07H R AS 1 Subwoofer preparation Make sure to unplug the AC power lead before installing the main unit or changing the position. Select from three installation methods according to the preferred position. Horizontal position Using spikes Vertical position 1 Place subwoofer stand as shown Tighten all spikes as shown Stand Using foot cushions 1 Attach the foot cushions as shown Subwoofer connections to TVs H Connecting to a TV TV H Connecting to a TV (with subwoofer pre-out) TV To audio output sockets Audio cable (supplied) To AUDIO INPUT sockets Audio cable (supplied) To SUBWOOFER PRE-OUT socket To AUDIO INPUT sockets Subwoofer Subwoofer [. . . ] [. . . ]